teuthology-2016-03-02_09:00:12-rados-hammer-distro-basic-vps/38225

Description: rados/thrash-erasure-code/{clusters/{fixed-2.yaml openstack.yaml} fs/ext4.yaml msgr-failures/osd-delay.yaml thrashers/morepggrow.yaml workloads/ec-radosbench.yaml}

Log: http://qa-proxy.ceph.com/teuthology/teuthology-2016-03-02_09:00:12-rados-hammer-distro-basic-vps/38225/teuthology.log

Sentry event: http://sentry.ceph.com/sepia/teuthology/?q=0fa00c8e26f84e7a8d309a60c8c96708

Failure Reason:

{'vpm114.front.sepia.ceph.com': {'cmd': ['cpan', 'Amazon::S3'], 'end': '2016-03-02 18:46:07.318958', 'stdout': 'Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nReading \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz\'\n............................................................................DONE\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/02packages.details.txt.gz\nReading \'/home/ubuntu/.cpan/sources/modules/02packages.details.txt.gz\'\n Database was generated on Fri, 12 Feb 2016 02:17:02 GMT\n.............\n New CPAN.pm version (v2.10) available.\n [Currently running version is v2.00]\n You might want to try\n install CPAN\n reload cpan\n to both upgrade CPAN.pm and run the new version without leaving\n the current session.\n\n\n...............................................................DONE\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/03modlist.data.gz\nReading \'/home/ubuntu/.cpan/sources/modules/03modlist.data.gz\'\nDONE\nWriting /home/ubuntu/.cpan/Metadata\nRunning install for module \'Amazon::S3\'\nRunning make for T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz ok\n\n CPAN.pm: Building T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for Amazon::S3\nWriting MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- TIMA/Amazon-S3-0.45.tar.gz ----\n XML::Simple [requires]\n LWP::UserAgent::Determined [requires]\n Digest::HMAC_SHA1 [requires]\n Digest::MD5::File [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::Simple\'\nRunning make for G/GR/GRANTM/XML-Simple-2.22.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::Simple\nWriting MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- GRANTM/XML-Simple-2.22.tar.gz ----\n XML::SAX::Expat [requires]\n XML::NamespaceSupport [requires]\n XML::SAX [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::SAX::Expat\'\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz ok\n\n CPAN.pm: Building B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Expat\nWriting MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- BJOERN/XML-SAX-Expat-0.51.tar.gz ----\n XML::NamespaceSupport [requires]\n XML::SAX [requires]\n XML::SAX::Base [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::NamespaceSupport\'\nRunning make for P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz ok\n\n CPAN.pm: Building P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::NamespaceSupport\nWriting MYMETA.yml and MYMETA.json\ncp lib/XML/NamespaceSupport.pm blib/lib/XML/NamespaceSupport.pm\nManifying blib/man3/XML::NamespaceSupport.3pm\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make -- OK\n\'YAML\' not installed, will not store persistent state\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'inc\', \'blib/lib\', \'blib/arch\')" t/*.t\nt/00base.t .. ok\nAll tests successful.\nFiles=1, Tests=48, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.04 cusr 0.00 csys = 0.08 CPU)\nResult: PASS\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/XML/NamespaceSupport.pm\nInstalling /usr/local/man/man3/XML::NamespaceSupport.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'XML::SAX\'\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX\nWriting MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- GRANTM/XML-SAX-0.99.tar.gz ----\n XML::SAX::Base [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::SAX::Base\'\nRunning make for G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Base\nWriting MYMETA.yml and MYMETA.json\ncp lib/XML/SAX/Base.pm blib/lib/XML/SAX/Base.pm\ncp lib/XML/SAX/Exception.pm blib/lib/XML/SAX/Exception.pm\ncp BuildSAXBase.pl blib/lib/XML/SAX/BuildSAXBase.pl\nManifying blib/man3/XML::SAX::Exception.3pm\nManifying blib/man3/XML::SAX::Base.3pm\nManifying blib/man3/XML::SAX::BuildSAXBase.3pm\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ............. ok\nt/01exception.t ......... ok\nt/01simpledriver.t ...... ok\nt/02simplefilter.t ...... ok\nt/03chdriver.t .......... ok\nt/04chfilter.t .......... ok\nt/05dtdhdriver.t ........ ok\nt/06lexhdriver.t ........ ok\nt/07declhdriver.t ....... ok\nt/08errorhdriver.t ...... ok\nt/09resoldriver.t ....... ok\nt/10dochdriver.t ........ ok\nt/11sax1multiclass.t .... ok\nt/12sax2multiclass.t .... ok\nt/13handlerswitch.t ..... ok\nt/14downstreamswitch.t .. ok\nt/15parentswitch.t ...... ok\nt/16gethandlers.t ....... ok\nt/release-pod-syntax.t .. skipped: these tests are for release candidate testing\nAll tests successful.\nFiles=19, Tests=137, 0 wallclock secs ( 0.08 usr 0.01 sys + 0.49 cusr 0.09 csys = 0.67 CPU)\nResult: PASS\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/XML::SAX::Exception.3pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Base.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/BuildSAXBase.pl\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Exception.pm\nInstalling /usr/local/man/man3/XML::SAX::BuildSAXBase.3pm\nInstalling /usr/local/man/man3/XML::SAX::Base.3pm\nInstalling /usr/local/man/man3/XML::SAX::Exception.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make install -- OK\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-0.99-F6mx3q\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ncp SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm\ncp SAX/PurePerl.pm blib/lib/XML/SAX/PurePerl.pm\ncp SAX/PurePerl/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm\ncp SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm\ncp SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm\ncp SAX/Intro.pod blib/lib/XML/SAX/Intro.pod\ncp SAX/PurePerl/Reader/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/Stream.pm blib/lib/XML/SAX/PurePerl/Reader/Stream.pm\ncp SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm\ncp SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm\ncp SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm\ncp SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm\ncp SAX/PurePerl/Reader/String.pm blib/lib/XML/SAX/PurePerl/Reader/String.pm\ncp SAX.pm blib/lib/XML/SAX.pm\ncp SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm\ncp SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm\ncp SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm\ncp SAX/ParserFactory.pm blib/lib/XML/SAX/ParserFactory.pm\ncp SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm\nManifying blib/man3/XML::SAX::PurePerl::Reader.3pm\nManifying blib/man3/XML::SAX::Intro.3pm\nManifying blib/man3/XML::SAX::ParserFactory.3pm\nManifying blib/man3/XML::SAX::DocumentLocator.3pm\nManifying blib/man3/XML::SAX::PurePerl.3pm\nManifying blib/man3/XML::SAX.3pm\n GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ...... ok\nt/01known.t ...... ok\nt/10xmldecl1.t ... ok\nt/11xmldecl2.t ... ok\nt/12miscstart.t .. ok\nt/13int_ent.t .... ok\nt/14encoding.t ... ok\nt/15element.t .... ok\nt/16large.t ...... ok\nt/20factory.t .... ok\nt/21saxini.t ..... ok\nt/40cdata.t ...... ok\nt/42entities.t ... ok\nt/99cleanup.t .... ok\nAll tests successful.\nFiles=14, Tests=106, 2 wallclock secs ( 0.07 usr 0.00 sys + 1.32 cusr 0.12 csys = 1.51 CPU)\nResult: PASS\n GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/XML/SAX.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/ParserFactory.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Intro.pod\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/DocumentLocator.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/UnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/EncodingDetect.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Productions.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/NoUnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DTDDecls.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/XMLDecl.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Exception.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DocType.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DebugHandler.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/UnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/URI.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/Stream.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/String.pm\nInstalling /usr/local/man/man3/XML::SAX::DocumentLocator.3pm\nInstalling /usr/local/man/man3/XML::SAX.3pm\nInstalling /usr/local/man/man3/XML::SAX::ParserFactory.3pm\nInstalling /usr/local/man/man3/XML::SAX::Intro.3pm\nInstalling /usr/local/man/man3/XML::SAX::PurePerl::Reader.3pm\nInstalling /usr/local/man/man3/XML::SAX::PurePerl.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\ncould not find ParserDetails.ini in /home/ubuntu/.cpan/build/XML-SAX-0.99-F6mx3q/blib/lib/XML/SAX\n GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make install -- OK\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-Expat-0.51-V1JJNy\n\n CPAN.pm: Building B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ncp Expat.pm blib/lib/XML/SAX/Expat.pm\nManifying blib/man3/XML::SAX::Expat.3pm\n BJOERN/XML-SAX-Expat-0.51.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ... ok\nt/98podsyn.t .. skipped: Test::Pod 1.00 required for testing POD\nt/99podcov.t .. skipped: Test::Pod::Coverage required for testing pod coverage\nAll tests successful.\nFiles=3, Tests=1, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.09 CPU)\nResult: PASS\n BJOERN/XML-SAX-Expat-0.51.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Expat.pm\nInstalling /usr/local/man/man3/XML::SAX::Expat.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\ncould not find ParserDetails.ini in /usr/local/share/perl/5.18.2/XML/SAX\n BJOERN/XML-SAX-Expat-0.51.tar.gz\n /usr/bin/make install -- OK\nXML::SAX is up to date (0.99).\nRunning make for G/GR/GRANTM/XML-Simple-2.22.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-Simple-2.22-HTTaYB\n\n CPAN.pm: Building G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\ncp lib/XML/Simple/FAQ.pod blib/lib/XML/Simple/FAQ.pod\ncp lib/XML/Simple.pm blib/lib/XML/Simple.pm\nManifying blib/man3/XML::Simple.3pm\nManifying blib/man3/XML::Simple::FAQ.3pm\n GRANTM/XML-Simple-2.22.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/0_Config.t ............ ok\nt/1_XMLin.t ............. ok\nt/2_XMLout.t ............ ok\nt/3_Storable.t .......... ok\nt/4_MemShare.t .......... ok\nt/5_MemCopy.t ........... ok\nt/6_ObjIntf.t ........... ok\nt/7_SaxStuff.t .......... ok\nt/8_Namespaces.t ........ ok\nt/9_Strict.t ............ ok\nt/A_XMLParser.t ......... ok\nt/B_Hooks.t ............. ok\nt/release-pod-syntax.t .. skipped: these tests are for release candidate testing\nAll tests successful.\nFiles=13, Tests=501, 13 wallclock secs ( 0.10 usr 0.03 sys + 1.55 cusr 0.12 csys = 1.80 CPU)\nResult: PASS\n GRANTM/XML-Simple-2.22.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/XML/Simple.pm\nInstalling /usr/local/share/perl/5.18.2/XML/Simple/FAQ.pod\nInstalling /usr/local/man/man3/XML::Simple::FAQ.3pm\nInstalling /usr/local/man/man3/XML::Simple.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n GRANTM/XML-Simple-2.22.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'LWP::UserAgent::Determined\'\nRunning make for A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz ok\n\n CPAN.pm: Building A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for LWP::UserAgent::Determined\nWriting MYMETA.yml and MYMETA.json\ncp lib/LWP/UserAgent/Determined.pm blib/lib/LWP/UserAgent/Determined.pm\nManifying blib/man3/LWP::UserAgent::Determined.3pm\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/01_about_verbose.t .... ok\nt/10_determined_test.t .. ok\nAll tests successful.\nFiles=2, Tests=15, 38 wallclock secs ( 0.04 usr 0.00 sys + 0.10 cusr 0.01 csys = 0.15 CPU)\nResult: PASS\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/LWP::UserAgent::Determined.3pm\nInstalling /usr/local/share/perl/5.18.2/LWP/UserAgent/Determined.pm\nInstalling /usr/local/man/man3/LWP::UserAgent::Determined.3pm\nAppending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'Digest::HMAC_SHA1\'\nRunning make for G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nLWP failed with code[500] message[Can\'t connect to apt-mirror.sepia.ceph.com:80 (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884" "http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884\'. Giving up on it.\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nLWP failed with code[500] message[Can\'t connect to apt-mirror.sepia.ceph.com:80 (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884" "http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884\'. Giving up on it.\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884" "http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884\'. Giving up on it.\nNo external ftp command available\n\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884" "http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz.tmp9884\'. Giving up on it.\nNo external ftp command available\n\nPlease check, if the URLs I found in your configuration file\n(http://apt-mirror.sepia.ceph.com/CPAN/) are valid. The urllist can be\nedited. E.g. with \'o conf urllist push ftp://myurl/\'\n\nCould not fetch authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz', 'changed': True, 'rc': 2, 'start': '2016-03-02 18:44:50.890750', 'stderr': u'Warning: prerequisite Digest::HMAC_SHA1 0 not found.\nWarning: prerequisite Digest::MD5::File 0 not found.\nWarning: prerequisite LWP::UserAgent::Determined 0 not found.\nWarning: prerequisite XML::Simple 1.08 not found.\nWarning: prerequisite XML::NamespaceSupport 1.04 not found.\nWarning: prerequisite XML::SAX 0.15 not found.\nWarning: prerequisite XML::SAX::Expat 0 not found.\nWarning: prerequisite XML::NamespaceSupport 0.03 not found.\nWarning: prerequisite XML::SAX 0.03 not found.\nWarning: prerequisite XML::SAX::Base 1.00 not found.\nCannot determine perl version info from lib/XML/NamespaceSupport.pm\nWarning: prerequisite XML::SAX::Base 1.05 not found.\nparsed 80085 bytes in 0 seconds\n# \r# Package Version\n# perl 5.18.2\n# XML::Simple 2.22\n# Storable 2.41\n# XML::Parser 2.41\n# XML::SAX 0.99\n# XML::NamespaceSupport 1.11\n# XML::SAX::Expat 0.51 (default parser)\n--2016-03-02 18:46:06-- http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:06-- http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:06-- http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:06-- http://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019', 'delta': '0:01:16.428208', 'invocation': {'module_name': 'command', 'module_args': 'cpan Amazon::S3'}, 'warnings': []}, 'vpm142.front.sepia.ceph.com': {'cmd': ['cpan', 'Amazon::S3'], 'end': '2016-03-02 18:46:08.995930', 'stdout': 'Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nLWP failed with code[500] message[Can\'t connect to apt-mirror.sepia.ceph.com:80 (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476" "http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476\'. Giving up on it.\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476" "http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476\'. Giving up on it.\nNo external ftp command available\n\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nLWP failed with code[500] message[Can\'t connect to apt-mirror.sepia.ceph.com:80 (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476" "http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476\'. Giving up on it.\n\nTrying with\n /usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476"\nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\n Function system("/usr/bin/wget -O "/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476" "http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz" ")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476 with size 0\n Warning: no success downloading \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz.tmp10476\'. Giving up on it.\nNo external ftp command available\n\nPlease check, if the URLs I found in your configuration file\n(http://apt-mirror.sepia.ceph.com/CPAN/) are valid. The urllist can be\nedited. E.g. with \'o conf urllist push ftp://myurl/\'\n\nCould not fetch authors/01mailrc.txt.gz', 'changed': True, 'rc': 2, 'start': '2016-03-02 18:46:08.606614', 'stderr': u'--2016-03-02 18:46:08-- http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:08-- http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:08-- http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019\n--2016-03-02 18:46:08-- http://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nResolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019', 'delta': '0:00:00.389316', 'invocation': {'module_name': 'command', 'module_args': 'cpan Amazon::S3'}, 'warnings': []}}