sage-2020-01-24_13:15:58-rados-wip-sage2-testing-2020-01-23-1953-distro-basic-smithi

Command failed on smithi076 with status 22: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage timeout 120 ceph --cluster ceph pg dump --format=json'

Command failed on smithi200 with status 1: "sudo TESTDIR=/home/ubuntu/cephtest bash -c 'ceph osd require-osd-release octopus'"

repository, to point to a working', u' upstream. This is most often useful if you are using a newer', u' distribution release than is supported by the repository (and the', u' packages for the previous distribution release still work).', u'', u' 3. Run the command with the repository temporarily disabled', u' yum --disablerepo=epel ...', u'', u" 4. Disable the repository permanently, so yum won't use it by default. Yum", u' will then just ignore the repository until you permanently enable it', u' again or use --enablerepo for temporary usage:', u'', u' yum-config-manager --disable epel', u' or', u' subscription-manager repos --disable=epel', u'', u' 5. Configure the failing repository to be skipped, if it is unavailable.', u' Note that yum will try to contact the repo. when it runs most commands,', u' so will have to try and fail each time (and thus. yum will be be much', u' slower). If it is a very temporary problem though, this is often a nice', u' compromise:', u'', u' yum-config-manager --save --setopt=epel.skip_if_unavailable=true', u'', u'failure: repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try.', u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 1708046 bytes remaining to read"'], u'changed': True, u'stderr': u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 4733866 bytes remaining to read"\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/847ea7712ecf18929572ab1c59abfa4500e779f22773ff681df1d42620aa4fc3-updateinfo.xml.zck: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/847ea7712ecf18929572ab1c59abfa4500e779f22773ff681df1d42620aa4fc3-updateinfo.xml.zck: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 3318310 bytes remaining to read"\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 1708046 bytes remaining to read"\nTrying other mirror.\n\n\n One of the configured repositories failed (Extra Packages for Enterprise Linux),\n and yum doesn\'t have enough cached data to continue. At this point the only\n safe thing yum can do is fail. There are a few ways to work "fix" this:\n\n 1. Contact the upstream for the repository and get them to fix the problem.\n\n 2. Reconfigure the baseurl/etc. for the repository, to point to a working\n upstream. This is most often useful if you are using a newer\n distribution release than is supported by the repository (and the\n packages for the previous distribution release still work).\n\n 3. Run the command with the repository temporarily disabled\n yum --disablerepo=epel ...\n\n 4. Disable the repository permanently, so yum won\'t use it by default. Yum\n will then just ignore the repository until you permanently enable it\n again or use --enablerepo for temporary usage:\n\n yum-config-manager --disable epel\n or\n subscription-manager repos --disable=epel\n\n 5. Configure the failing repository to be skipped, if it is unavailable.\n Note that yum will try to contact the repo. when it runs most commands,\n so will have to try and fail each time (and thus. yum will be be much\n slower). If it is a very temporary problem though, this is often a nice\n compromise:\n\n yum-config-manager --save --setopt=epel.skip_if_unavailable=true\n\nfailure: repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 1708046 bytes remaining to read"', u'stdout': u'Loaded plugins: fastestmirror, langpacks, priorities\nCleaning repos: base centos7-fcgi-ceph epel extras lab-extras updates\nLoaded plugins: fastestmirror, langpacks, priorities\nDetermining fastest mirrors\n * base: packages.oit.ncsu.edu\n * extras: mirror.cogentco.com\n * updates: mirror.math.princeton.edu', u'msg': u'non-zero return code', u'delta': u'0:25:24.864532', 'stdout_lines': [u'Loaded plugins: fastestmirror, langpacks, priorities', u'Cleaning repos: base centos7-fcgi-ceph epel extras lab-extras updates', u'Loaded plugins: fastestmirror, langpacks, priorities', u'Determining fastest mirrors', u' * base: packages.oit.ncsu.edu', u' * extras: mirror.cogentco.com', u' * updates: mirror.math.princeton.edu'], u'end': u'2020-01-24 15:32:02.767192', '_ansible_no_log': False, u'cmd': u'rm -rf /var/cache/yum/*; yum clean all; yum makecache', u'start': u'2020-01-24 15:06:37.902660', u'warnings': [u"Consider using the file module with state=absent rather than running 'rm'. If you need to use command because file is insufficient you can add 'warn: false' to this command task or set 'command_warnings=False' in ansible.cfg to get rid of this message."], u'rc': 1, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'strip_empty_ends': True, u'_raw_params': u'rm -rf /var/cache/yum/*; yum clean all; yum makecache', u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin_add_newline': True, u'stdin': None}}}}Traceback (most recent call last): File "/home/teuthworker/src/git.ceph.com_git_ceph-cm-ansible_master/callback_plugins/failure_log.py", line 44, in log_failure log.error(yaml.safe_dump(failure)) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 309, in safe_dump return dump_all([data], stream, Dumper=SafeDumper, **kwds) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 281, in dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 29, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 68, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 251, in represent_undefined raise RepresenterError("cannot represent an object", data)RepresenterError: ('cannot represent an object', u'rm -rf /var/cache/yum/*; yum clean all; yum makecache')Failure object was: {'smithi155.front.sepia.ceph.com': {'stderr_lines': [u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 6448522 bytes remaining to read"', u'Trying other mirror.', u"http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds')", u'Trying other mirror.', u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 2044450 bytes remaining to read"', u'Trying other mirror.', u"http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds')", u'Trying other mirror.', u"http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds')", u'Trying other mirror.', u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 820908 bytes remaining to read"', u'Trying other mirror.', u'', u'', u' One of the configured repositories failed (Extra Packages for Enterprise Linux),', u" and yum doesn't have enough cached data to continue. At this point the only", u' safe thing yum can do is fail. There are a few ways to work "fix" this:', u'', u' 1. Contact the upstream for the repository and get them to fix the problem.', u'', u' 2. Reconfigure the baseurl/etc. for the repository, to point to a working', u' upstream. This is most often useful if you are using a newer', u' distribution release than is supported by the repository (and the', u' packages for the previous distribution release still work).', u'', u' 3. Run the command with the repository temporarily disabled', u' yum --disablerepo=epel ...', u'', u" 4. Disable the repository permanently, so yum won't use it by default. Yum", u' will then just ignore the repository until you permanently enable it', u' again or use --enablerepo for temporary usage:', u'', u' yum-config-manager --disable epel', u' or', u' subscription-manager repos --disable=epel', u'', u' 5. Configure the failing repository to be skipped, if it is unavailable.', u' Note that yum will try to contact the repo. when it runs most commands,', u' so will have to try and fail each time (and thus. yum will be be much', u' slower). If it is a very temporary problem though, this is often a nice', u' compromise:', u'', u' yum-config-manager --save --setopt=epel.skip_if_unavailable=true', u'', u'failure: repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try.', u"http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds')", u"http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds')", u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 820908 bytes remaining to read"'], u'changed': True, u'stderr': u'http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 6448522 bytes remaining to read"\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 2044450 bytes remaining to read"\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nTrying other mirror.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 820908 bytes remaining to read"\nTrying other mirror.\n\n\n One of the configured repositories failed (Extra Packages for Enterprise Linux),\n and yum doesn\'t have enough cached data to continue. At this point the only\n safe thing yum can do is fail. There are a few ways to work "fix" this:\n\n 1. Contact the upstream for the repository and get them to fix the problem.\n\n 2. Reconfigure the baseurl/etc. for the repository, to point to a working\n upstream. This is most often useful if you are using a newer\n distribution release than is supported by the repository (and the\n packages for the previous distribution release still work).\n\n 3. Run the command with the repository temporarily disabled\n yum --disablerepo=epel ...\n\n 4. Disable the repository permanently, so yum won\'t use it by default. Yum\n will then just ignore the repository until you permanently enable it\n again or use --enablerepo for temporary usage:\n\n yum-config-manager --disable epel\n or\n subscription-manager repos --disable=epel\n\n 5. Configure the failing repository to be skipped, if it is unavailable.\n Note that yum will try to contact the repo. when it runs most commands,\n so will have to try and fail each time (and thus. yum will be be much\n slower). If it is a very temporary problem though, this is often a nice\n compromise:\n\n yum-config-manager --save --setopt=epel.skip_if_unavailable=true\n\nfailure: repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try.\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: (28, \'Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds\')\nhttp://dl.fedoraproject.org/pub/epel/7/x86_64/repodata/d0878257236e2d6fa937b34d0f8b5a3551ee8b90f497fd308734bd43c44fe6b4-filelists.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 820908 bytes remaining to read"', u'stdout': u'Loaded plugins: fastestmirror, langpacks, priorities\nCleaning repos: base centos7-fcgi-ceph epel extras lab-extras updates\nLoaded plugins: fastestmirror, langpacks, priorities\nDetermining fastest mirrors\n * base: packages.oit.ncsu.edu\n * extras: repos-va.psychz.net\n * updates: mirror.math.princeton.edu', u'msg': u'non-zero return code', u'delta': u'0:40:22.284715', 'stdout_lines': [u'Loaded plugins: fastestmirror, langpacks, priorities', u'Cleaning repos: base centos7-fcgi-ceph epel extras lab-extras updates', u'Loaded plugins: fastestmirror, langpacks, priorities', u'Determining fastest mirrors', u' * base: packages.oit.ncsu.edu', u' * extras: repos-va.psychz.net', u' * updates: mirror.math.princeton.edu'], u'end': u'2020-01-24 15:46:59.083378', '_ansible_no_log': False, u'cmd': u'rm -rf /var/cache/yum/*; yum clean all; yum makecache', u'start': u'2020-01-24 15:06:36.798663', u'warnings': [u"Consider using the file module with state=absent rather than running 'rm'. If you need to use command because file is insufficient you can add 'warn: false' to this command task or set 'command_warnings=False' in ansible.cfg to get rid of this message."], u'rc': 1, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'strip_empty_ends': True, u'_raw_params': u'rm -rf /var/cache/yum/*; yum clean all; yum makecache', u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin_add_newline': True, u'stdin': None}}}}Traceback (most recent call last): File "/home/teuthworker/src/git.ceph.com_git_ceph-cm-ansible_master/callback_plugins/failure_log.py", line 44, in log_failure log.error(yaml.safe_dump(failure)) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 309, in safe_dump return dump_all([data], stream, Dumper=SafeDumper, **kwds) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 281, in dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 29, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 68, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 251, in represent_undefined raise RepresenterError("cannot represent an object", data)RepresenterError: ('cannot represent an object', u'rm -rf /var/cache/yum/*; yum clean all; yum makecache')

Command failed (workunit test rados/test.sh) on smithi098 with status 1: 'mkdir -p -- /home/ubuntu/cephtest/mnt.0/client.0/tmp && cd -- /home/ubuntu/cephtest/mnt.0/client.0/tmp && CEPH_CLI_TEST_DUP_COMMAND=1 CEPH_REF=cc5e8d14f86da9a296c11c7a9ef7c6a8f147941f TESTDIR="/home/ubuntu/cephtest" CEPH_ARGS="--cluster ceph" CEPH_ID="0" PATH=$PATH:/usr/sbin CEPH_BASE=/home/ubuntu/cephtest/clone.client.0 CEPH_ROOT=/home/ubuntu/cephtest/clone.client.0 adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage timeout 3h /home/ubuntu/cephtest/clone.client.0/qa/workunits/rados/test.sh'

Command failed on smithi086 with status 1: 'sudo yum -y install ceph-mgr-cephadm'

Command failed on smithi172 with status 1: 'sudo yum -y install ceph-radosgw'

n dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 29, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 68, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 251, in represent_undefined raise RepresenterError("cannot represent an object", data)RepresenterError: ('cannot represent an object', u'/')Failure object was: {'smithi101.front.sepia.ceph.com': {'_ansible_no_log': False, u'invocation': {u'module_args': {u'install_weak_deps': True, u'autoremove': False, u'lock_timeout': 0, u'download_dir': None, u'install_repoquery': True, u'enable_plugin': [], u'update_cache': False, u'disable_excludes': None, u'exclude': [], u'installroot': u'/', u'allow_downgrade': False, u'name': [u'@core', u'@base', u'dnf-utils', u'git-all', u'sysstat', u'libedit', u'boost-thread', u'xfsprogs', u'gdisk', u'parted', u'libgcrypt', u'fuse-libs', u'openssl', u'libuuid', u'attr', u'ant', u'lsof', u'gettext', u'bc', u'xfsdump', u'blktrace', u'usbredir', u'podman', u'podman-docker', u'libev-devel', u'valgrind', u'nfs-utils', u'ncurses-devel', u'gcc', u'git', u'python3-nose', u'python3-virtualenv', u'genisoimage', u'qemu-img', u'qemu-kvm-core', u'qemu-kvm-block-rbd', u'libacl-devel', u'dbench', u'autoconf'], u'download_only': False, u'bugfix': False, u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'update_only': False, u'state': u'present', u'disablerepo': [], u'releasever': None, u'disable_plugin': [], u'enablerepo': [], u'skip_broken': False, u'security': False, u'validate_certs': True}}, 'changed': False, u'results': [], u'msg': u'Failed to download packages: Curl error (28): Timeout was reached for https://mirrors.fedoraproject.org/metalink?repo=epel-8&arch=x86_64&infra=$infra&content=$contentdir [Operation too slow. Less than 1000 bytes/sec transferred the last 300 seconds]'}}Traceback (most recent call last): File "/home/teuthworker/src/git.ceph.com_git_ceph-cm-ansible_master/callback_plugins/failure_log.py", line 44, in log_failure log.error(yaml.safe_dump(failure)) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 309, in safe_dump return dump_all([data], stream, Dumper=SafeDumper, **kwds) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 281, in dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 29, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 68, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 251, in represent_undefined raise RepresenterError("cannot represent an object", data)RepresenterError: ('cannot represent an object', u'/')

Command failed on smithi094 with status 1: 'sudo yum -y install ceph-radosgw'

l dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 29, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 58, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 227, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 125, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 68, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 251, in represent_undefined raise RepresenterError("cannot represent an object", data)RepresenterError: ('cannot represent an object', u'/')

Command failed (s3 tests against rgw) on smithi094 with status 1: "S3TEST_CONF=/home/ubuntu/cephtest/archive/s3-tests.client.0.conf BOTO_CONFIG=/home/ubuntu/cephtest/boto.cfg REQUESTS_CA_BUNDLE=/etc/ssl/certs/ca-certificates.crt /home/ubuntu/cephtest/s3-tests/virtualenv/bin/python -m nose -w /home/ubuntu/cephtest/s3-tests -v -a '!fails_on_rgw,!lifecycle_expiration,!fails_strict_rfc2616,!fails_with_subdomain'"

Test failure: test_host_ls (tasks.mgr.test_cephadm_orchestrator.TestOrchestratorCli)

Command failed on smithi121 with status 1: 'sudo /home/ubuntu/cephtest/cephadm --image quay.io/ceph-ci/ceph:cc5e8d14f86da9a296c11c7a9ef7c6a8f147941f bootstrap --fsid ca5ac990-3ec9-11ea-99dd-001a4aab830c --mon-id a --mgr-id y --config /home/ubuntu/cephtest/seed.ceph.conf --output-config /home/ubuntu/cephtest/ceph.conf --output-keyring /home/ubuntu/cephtest/ceph.keyring --output-pub-ssh-key /home/ubuntu/cephtest/ceph.pub --mon-ip 172.21.15.121 && sudo chmod +r /home/ubuntu/cephtest/ceph.keyring'

SELinux denials found on ubuntu@smithi007.front.sepia.ceph.com: ['type=AVC msg=audit(1579885801.464:6847): avc: denied { getattr } for pid=29953 comm="logrotate" path="/var/log/ceph/631dda72-3ecb-11ea-99dd-001a4aab830c/ceph-mgr.x.log" dev="sda1" ino=527338 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=system_u:object_r:container_file_t:s0 tclass=file permissive=1', 'type=AVC msg=audit(1579885801.463:6846): avc: denied { read } for pid=29953 comm="logrotate" name="631dda72-3ecb-11ea-99dd-001a4aab830c" dev="sda1" ino=527308 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=system_u:object_r:container_file_t:s0 tclass=dir permissive=1', 'type=AVC msg=audit(1579885801.482:6850): avc: denied { getattr } for pid=29953 comm="logrotate" path="/var/log/ceph/631dda72-3ecb-11ea-99dd-001a4aab830c/ceph-mgr.x.log" dev="sda1" ino=527338 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=system_u:object_r:container_file_t:s0 tclass=file permissive=1']

timeout expired in wait_until_healthy

ceph version 14.2.6-343.g14069d1 was not installed, found 14.2.6-341.g63df041.el7.

Test failure: test_diskprediction_cloud (tasks.mgr.test_module_selftest.TestModuleSelftest)

Command failed (workunit test osd/osd-backfill-recovery-log.sh) on smithi104 with status 1: 'mkdir -p -- /home/ubuntu/cephtest/mnt.0/client.0/tmp && cd -- /home/ubuntu/cephtest/mnt.0/client.0/tmp && CEPH_CLI_TEST_DUP_COMMAND=1 CEPH_REF=cc5e8d14f86da9a296c11c7a9ef7c6a8f147941f TESTDIR="/home/ubuntu/cephtest" CEPH_ARGS="--cluster ceph" CEPH_ID="0" PATH=$PATH:/usr/sbin CEPH_BASE=/home/ubuntu/cephtest/clone.client.0 CEPH_ROOT=/home/ubuntu/cephtest/clone.client.0 adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage timeout 3h /home/ubuntu/cephtest/clone.client.0/qa/standalone/osd/osd-backfill-recovery-log.sh'

SELinux denials found on ubuntu@smithi001.front.sepia.ceph.com: ['type=AVC msg=audit(1579889581.411:6636): avc: denied { getattr } for pid=20616 comm="logrotate" path="/var/log/ceph/4d2a9f22-3ed3-11ea-99dd-001a4aab830c/ceph-mon.c.log" dev="sda1" ino=527572 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=system_u:object_r:container_file_t:s0 tclass=file permissive=1', 'type=AVC msg=audit(1579889581.411:6635): avc: denied { read } for pid=20616 comm="logrotate" name="4d2a9f22-3ed3-11ea-99dd-001a4aab830c" dev="sda1" ino=527565 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=system_u:object_r:container_file_t:s0 tclass=dir permissive=1']