teuthology-2019-04-13_01:25:03-upgrade:nautilus-p2p-nautilus-distro-basic-smithi

Command failed on smithi062 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 0'

Command failed on smithi136 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

Command failed on smithi077 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

1'], u'uuids': []}, u'sectors': u'781422768', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'Non-Volatile memory controller: Intel Corporation PCIe Data Center SSD (rev 01)', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [u'vg_nvme-lv_5', u'vg_nvme-lv_4', u'vg_nvme-lv_3', u'vg_nvme-lv_2', u'vg_nvme-lv_1'], u'partitions': {}, u'model': u'INTEL SSDPEDMD400G4', u'serial': u'PHFT6204010G400BGN', u'size': u'372.61 GB'}, 'key': u'nvme0n1'}, u'delta': u'0:00:01.111482', u'stderr': u'', u'rc': 0, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/nvme0n1 || sgdisk --zap-all /dev/nvme0n1', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'stdout_lines': [u'Creating new GPT entries.', u'GPT data structures destroyed! You may now partition the disk using fdisk or', u'other utilities.'], u'start': u'2019-04-13 14:53:53.731173', '_ansible_ignore_errors': None, 'failed': False}, {'_ansible_parsed': True, 'stderr_lines': [], u'cmd': u'sgdisk --zap-all /dev/dm-4 || sgdisk --zap-all /dev/dm-4', u'end': u'2019-04-13 14:53:56.086170', '_ansible_no_log': False, u'stdout': u'Creating new GPT entries.\nWarning: The kernel is still using the old partition table.\nThe new table will be used at the next reboot.\nGPT data structures destroyed! You may now partition the disk using fdisk or\nother utilities.', '_ansible_item_result': True, u'changed': True, 'item': {'value': {u'scheduler_mode': u'', u'rotational': u'0', u'vendor': None, u'links': {u'masters': [], u'labels': [], u'ids': [u'dm-name-vg_nvme-lv_1', u'dm-uuid-LVM-KSoSt597e2LD41ofHTAlF6W3xGtLzRP0KOUx0RByPSF5vMJbZkF1UjfycstXgGB4'], u'uuids': [u'bf079c1a-daee-46d0-ad18-8157f6884689']}, u'sectors': u'187539456', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [], u'partitions': {}, u'model': None, u'serial': u'PHFT6204010G400BGN', u'size': u'89.43 GB'}, 'key': u'dm-4'}, u'delta': u'0:00:01.056556', u'stderr': u'', u'rc': 0, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/dm-4 || sgdisk --zap-all /dev/dm-4', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'stdout_lines': [u'Creating new GPT entries.', u'Warning: The kernel is still using the old partition table.', u'The new table will be used at the next reboot.', u'GPT data structures destroyed! You may now partition the disk using fdisk or', u'other utilities.'], u'start': u'2019-04-13 14:53:55.029614', '_ansible_ignore_errors': None, 'failed': False}, {'_ansible_parsed': True, 'stderr_lines': [], u'cmd': u'sgdisk --zap-all /dev/dm-2 || sgdisk --zap-all /dev/dm-2', u'end': u'2019-04-13 14:53:57.345776', '_ansible_no_log': False, u'stdout': u'Creating new GPT entries.\nWarning: The kernel is still using the old partition table.\nThe new table will be used at the next reboot.\nGPT data structures destroyed! You may now partition the disk using fdisk or\nother utilities.', '_ansible_item_result': True, u'changed': True, 'item': {'value': {u'scheduler_mode': u'', u'rotational': u'0', u'vendor': None, u'links': {u'masters': [], u'labels': [], u'ids': [u'dm-name-vg_nvme-lv_3', u'dm-uuid-LVM-KSoSt597e2LD41ofHTAlF6W3xGtLzRP0ALrUSqsBlQonccMDxme0dLDHdgACRncw'], u'uuids': [u'1d51f2b4-c224-4d77-87c8-199a71dfcc81']}, u'sectors': u'187539456', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [], u'partitions': {}, u'model': None, u'serial': u'PHFT6204010G400BGN', u'size': u'89.43 GB'}, 'key': u'dm-2'}, u'delta': u'0:00:01.046930', u'stderr': u'', u'rc': 0, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/dm-2 || sgdisk --zap-all /dev/dm-2', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'stdout_lines': [u'Creating new GPT entries.', u'Warning: The kernel is still using the old partition table.', u'The new table will be used at the next reboot.', u'GPT data structures destroyed! You may now partition the disk using fdisk or', u'other utilities.'], u'start': u'2019-04-13 14:53:56.298846', '_ansible_ignore_errors': None, 'failed': False}, {'_ansible_parsed': True, 'stderr_lines': [], u'cmd': u'sgdisk --zap-all /dev/dm-3 || sgdisk --zap-all /dev/dm-3', u'end': u'2019-04-13 14:53:58.638294', '_ansible_no_log': False, u'stdout': u'Creating new GPT entries.\nWarning: The kernel is still using the old partition table.\nThe new table will be used at the next reboot.\nGPT data structures destroyed! You may now partition the disk using fdisk or\nother utilities.', '_ansible_item_result': True, u'changed': True, 'item': {'value': {u'scheduler_mode': u'', u'rotational': u'0', u'vendor': None, u'links': {u'masters': [], u'labels': [], u'ids': [u'dm-name-vg_nvme-lv_2', u'dm-uuid-LVM-KSoSt597e2LD41ofHTAlF6W3xGtLzRP0FtYSA3fmOSjFgONq5QT6Bw5F8DC4dCuL'], u'uuids': [u'24246178-422f-4dd7-937b-7c9da9ab000a']}, u'sectors': u'187539456', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [], u'partitions': {}, u'model': None, u'serial': u'PHFT6204010G400BGN', u'size': u'89.43 GB'}, 'key': u'dm-3'}, u'delta': u'0:00:01.041784', u'stderr': u'', u'rc': 0, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/dm-3 || sgdisk --zap-all /dev/dm-3', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'stdout_lines': [u'Creating new GPT entries.', u'Warning: The kernel is still using the old partition table.', u'The new table will be used at the next reboot.', u'GPT data structures destroyed! You may now partition the disk using fdisk or', u'other utilities.'], u'start': u'2019-04-13 14:53:57.596510', '_ansible_ignore_errors': None, 'failed': False}, {'_ansible_parsed': True, 'stderr_lines': [u'Warning! MBR not overwritten! Error is 5!'], u'cmd': u'sgdisk --zap-all /dev/dm-0 || sgdisk --zap-all /dev/dm-0', u'end': u'2019-04-13 14:54:00.032521', '_ansible_no_log': False, u'stdout': u'Creating new GPT entries.\nWarning: The kernel is still using the old partition table.\nThe new table will be used at the next reboot.\nGPT data structures destroyed! You may now partition the disk using fdisk or\nother utilities.', '_ansible_item_result': True, u'changed': True, 'item': {'value': {u'scheduler_mode': u'', u'rotational': u'0', u'vendor': None, u'links': {u'masters': [], u'labels': [], u'ids': [u'dm-name-vg_nvme-lv_5', u'dm-uuid-LVM-KSoSt597e2LD41ofHTAlF6W3xGtLzRP0eBxEcMKFGJWyzyYr3RGiDaiVGtkQ68ht'], u'uuids': [u'88347c6e-86d6-437b-95eb-594a9bafbf64']}, u'sectors': u'31252480', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [], u'partitions': {}, u'model': None, u'serial': u'PHFT6204010G400BGN', u'size': u'14.90 GB'}, 'key': u'dm-0'}, u'delta': u'0:00:01.201575', u'stderr': u'Warning! MBR not overwritten! Error is 5!', u'rc': 0, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/dm-0 || sgdisk --zap-all /dev/dm-0', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'stdout_lines': [u'Creating new GPT entries.', u'Warning: The kernel is still using the old partition table.', u'The new table will be used at the next reboot.', u'GPT data structures destroyed! You may now partition the disk using fdisk or', u'other utilities.'], u'start': u'2019-04-13 14:53:58.830946', '_ansible_ignore_errors': None, 'failed': False}, {'_ansible_parsed': True, 'stderr_lines': [u'Problem opening /dev/dm-1 for reading! Error is 2.', u'The specified file does not exist!', u"Problem opening '' for writing! Program will now terminate.", u'Warning! MBR not overwritten! Error is 2!', u'Problem opening /dev/dm-1 for reading! Error is 2.', u'The specified file does not exist!', u"Problem opening '' for writing! Program will now terminate.", u'Warning! MBR not overwritten! Error is 2!'], u'cmd': u'sgdisk --zap-all /dev/dm-1 || sgdisk --zap-all /dev/dm-1', u'end': u'2019-04-13 14:54:00.217922', '_ansible_no_log': False, u'stdout': u'', '_ansible_item_result': True, u'changed': True, u'invocation': {u'module_args': {u'creates': None, u'executable': None, u'_uses_shell': True, u'_raw_params': u'sgdisk --zap-all /dev/dm-1 || sgdisk --zap-all /dev/dm-1', u'removes': None, u'warn': True, u'chdir': None, u'stdin': None}}, 'item': {'value': {u'scheduler_mode': u'', u'rotational': u'0', u'vendor': None, u'links': {u'masters': [], u'labels': [], u'ids': [u'dm-name-vg_nvme-lv_4', u'dm-uuid-LVM-KSoSt597e2LD41ofHTAlF6W3xGtLzRP0C7dHfBA1zjU12KB8Ln7b2t9pSzAzHfg6'], u'uuids': [u'5af63665-403a-4b06-8244-a2a0bb8a47b3']}, u'sectors': u'187539456', u'sas_device_handle': None, u'sas_address': None, u'virtual': 1, u'host': u'', u'sectorsize': u'512', u'removable': u'0', u'support_discard': u'512', u'holders': [], u'partitions': {}, u'model': None, u'serial': u'PHFT6204010G400BGN', u'size': u'89.43 GB'}, 'key': u'dm-1'}, u'delta': u'0:00:00.006817', u'stderr': u"Problem opening /dev/dm-1 for reading! Error is 2.\nThe specified file does not exist!\nProblem opening '' for writing! Program will now terminate.\nWarning! MBR not overwritten! Error is 2!\nProblem opening /dev/dm-1 for reading! Error is 2.\nThe specified file does not exist!\nProblem opening '' for writing! Program will now terminate.\nWarning! MBR not overwritten! Error is 2!", u'rc': 2, u'msg': u'non-zero return code', 'stdout_lines': [], u'start': u'2019-04-13 14:54:00.211105', u'failed': True}]}}Traceback (most recent call last): File "/home/teuthworker/src/git.ceph.com_git_ceph-cm-ansible_master/callback_plugins/failure_log.py", line 44, in log_failure log.error(yaml.safe_dump(failure)) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 218, in safe_dump return dump_all([data], stream, Dumper=SafeDumper, **kwds) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 190, in dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 28, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 217, in represent_list return self.represent_sequence(u'tag:yaml.org,2002:seq', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 101, in represent_sequence node_item = self.represent_data(item) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 67, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 249, in represent_undefined raise RepresenterError("cannot represent an object: %s" % data)RepresenterError: cannot represent an object: SATA controller: Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] (rev 05)smithi112.front.sepia.ceph.com: changed: false msg: All items completed results: - _ansible_item_result: true _ansible_no_log: false _ansible_parsed: true changed: false err: " /dev/vg_nvme/lv_5: not found: device not cleared\n Aborting. Failed to\ \ wipe start of new LV.\n" failed: true invocation: module_args: {active: true, force: false, lv: lv_5, opts: null, pvs: null, shrink: true, size: 4%VG, snapshot: null, state: present, vg: vg_nvme} item: key: lv_5 value: {size: 4%VG, vg: vg_nvme} msg: Creating logical volume 'lv_5' failed rc: 5 - _ansible_item_result: true _ansible_no_log: false _ansible_parsed: true changed: false err: " /dev/vg_nvme/lv_4: not found: device not cleared\n Aborting. Failed to\ \ wipe start of new LV.\n" failed: true invocation: module_args: {active: true, force: false, lv: lv_4, opts: null, pvs: null, shrink: true, size: 24%VG, snapshot: null, state: present, vg: vg_nvme} item: key: lv_4 value: {scratch_dev: true, size: 24%VG, vg: vg_nvme} msg: Creating logical volume 'lv_4' failed rc: 5 - _ansible_item_result: true _ansible_no_log: false _ansible_parsed: true changed: false err: " /dev/vg_nvme/lv_3: not found: device not cleared\n Aborting. Failed to\ \ wipe start of new LV.\n" failed: true invocation: module_args: {active: true, force: false, lv: lv_3, opts: null, pvs: null, shrink: true, size: 24%VG, snapshot: null, state: present, vg: vg_nvme} item: key: lv_3 value: {scratch_dev: true, size: 24%VG, vg: vg_nvme} msg: Creating logical volume 'lv_3' failed rc: 5 - _ansible_item_result: true _ansible_no_log: false _ansible_parsed: true changed: false err: " /dev/vg_nvme/lv_2: not found: device not cleared\n Aborting. Failed to\ \ wipe start of new LV.\n" failed: true invocation: module_args: {active: true, force: false, lv: lv_2, opts: null, pvs: null, shrink: true, size: 24%VG, snapshot: null, state: present, vg: vg_nvme} item: key: lv_2 value: {scratch_dev: true, size: 24%VG, vg: vg_nvme} msg: Creating logical volume 'lv_2' failed rc: 5 - _ansible_item_result: true _ansible_no_log: false _ansible_parsed: true changed: false err: " /dev/vg_nvme/lv_1: not found: device not cleared\n Aborting. Failed to\ \ wipe start of new LV.\n" failed: true invocation: module_args: {active: true, force: false, lv: lv_1, opts: null, pvs: null, shrink: true, size: 24%VG, snapshot: null, state: present, vg: vg_nvme} item: key: lv_1 value: {scratch_dev: true, size: 24%VG, vg: vg_nvme} msg: Creating logical volume 'lv_1' failed rc: 5

Command failed on smithi060 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

Command failed on smithi153 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 0'

nt', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, '_ansible_ignore_errors': None, u'msg': u''}, {'_ansible_parsed': True, u'changed': False, '_ansible_no_log': False, 'failed': False, '_ansible_item_result': True, u'results': [u'libuuid-2.23.2-59.el7.x86_64 providing libuuid is already installed'], 'item': u'libuuid', u'rc': 0, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'libuuid'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, '_ansible_ignore_errors': None, u'msg': u''}, {'_ansible_parsed': True, u'changed': False, '_ansible_no_log': False, 'failed': False, '_ansible_item_result': True, u'results': [u'btrfs-progs-4.9.1-1.el7.x86_64 providing btrfs-progs is already installed'], 'item': u'btrfs-progs', u'rc': 0, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'btrfs-progs'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, '_ansible_ignore_errors': None, u'msg': u''}, {'_ansible_parsed': True, u'changed': False, '_ansible_no_log': False, 'failed': False, '_ansible_item_result': True, u'results': [u'attr-2.4.46-13.el7.x86_64 providing attr is already installed'], 'item': u'attr', u'rc': 0, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'attr'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, '_ansible_ignore_errors': None, u'msg': u''}, {'msg': u'SSH Error: data could not be sent to remote host "smithi157.front.sepia.ceph.com". Make sure this host can be reached over ssh', 'unreachable': True, '_ansible_item_result': True, '_ansible_ignore_errors': None, 'item': u'valgrind'}, {'msg': u'SSH Error: data could not be sent to remote host "smithi157.front.sepia.ceph.com". Make sure this host can be reached over ssh', 'unreachable': True, '_ansible_item_result': True, '_ansible_ignore_errors': None, 'item': u'python-nose'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'mpich', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'mpich'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'ant', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'ant'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'lsof', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'lsof'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'iozone', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'iozone'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'libtool', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'libtool'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'automake', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'automake'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'gettext', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'gettext'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'libuuid-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'libuuid-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'libacl-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'libacl-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'bc', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'bc'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'xfsdump', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'xfsdump'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'blktrace', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'blktrace'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'numpy', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'numpy'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'python-matplotlib', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'python-matplotlib'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'qemu-kvm', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'qemu-kvm'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'usbredir', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'usbredir'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'genisoimage', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'genisoimage'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'httpd', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'httpd'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'httpd-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'httpd-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'httpd-tools', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'httpd-tools'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'mod_ssl', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'mod_ssl'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'mod_fastcgi-2.4.7-1.ceph.el7', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'mod_fastcgi-2.4.7-1.ceph.el7'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'libev-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'libev-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'perl-XML-Twig', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'perl-XML-Twig'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'java-1.6.0-openjdk-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'java-1.6.0-openjdk-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'junit4', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'junit4'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'nfs-utils', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'nfs-utils'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'ncurses-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'ncurses-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'python-devel', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'python-devel'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'python-virtualenv', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'python-virtualenv'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}, {'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, 'item': u'perl-CPAN', '_ansible_item_result': True, u'failed': True, u'invocation': {u'module_args': {u'allow_downgrade': False, u'name': [u'perl-CPAN'], u'list': None, u'disable_gpg_check': False, u'conf_file': None, u'install_repoquery': True, u'state': u'present', u'disablerepo': None, u'update_cache': False, u'enablerepo': None, u'exclude': None, u'security': False, u'validate_certs': True, u'installroot': u'/', u'skip_broken': False}}, u'msg': u'python2 bindings for rpm are needed for this module. python2 yum module is needed for this module'}]}}Traceback (most recent call last): File "/home/teuthworker/src/git.ceph.com_git_ceph-cm-ansible_master/callback_plugins/failure_log.py", line 44, in log_failure log.error(yaml.safe_dump(failure)) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 218, in safe_dump return dump_all([data], stream, Dumper=SafeDumper, **kwds) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/__init__.py", line 190, in dump_all dumper.represent(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 28, in represent node = self.represent_data(data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 217, in represent_list return self.represent_sequence(u'tag:yaml.org,2002:seq', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 101, in represent_sequence node_item = self.represent_data(item) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 57, in represent_data node = self.yaml_representers[data_types[0]](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 225, in represent_dict return self.represent_mapping(u'tag:yaml.org,2002:map', data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 123, in represent_mapping node_value = self.represent_data(item_value) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 67, in represent_data node = self.yaml_representers[None](self, data) File "/home/teuthworker/src/git.ceph.com_git_teuthology_master/virtualenv/local/lib/python2.7/site-packages/yaml/representer.py", line 249, in represent_undefined raise RepresenterError("cannot represent an object: %s" % data)RepresenterError: cannot represent an object: @core

SSH connection to smithi073 was lost: 'sudo package-cleanup -y --oldkernels'

Command failed on smithi060 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

SSH connection to smithi073 was lost: 'sudo DEBIAN_FRONTEND=noninteractive apt-get -y install linux-image-generic'

Command failed on smithi049 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 0'

Command failed on smithi012 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

{'smithi095.front.sepia.ceph.com': {'msg': 'SSH Error: data could not be sent to remote host "smithi095.front.sepia.ceph.com". Make sure this host can be reached over ssh', 'unreachable': True, 'changed': False}, 'smithi112.front.sepia.ceph.com': {'msg': 'All items completed', 'changed': False, 'results': [{'_ansible_parsed': True, '_ansible_item_result': True, '_ansible_no_log': False, 'err': ' /dev/vg_nvme/lv_5: not found: device not cleared\n Aborting. Failed to wipe start of new LV.\n', 'failed': True, 'changed': False, 'item': {'key': 'lv_5', 'value': {'size': '4%VG', 'vg': 'vg_nvme'}}, 'rc': 5, 'invocation': {'module_args': {'pvs': None, 'force': False, 'vg': 'vg_nvme', 'lv': 'lv_5', 'state': 'present', 'snapshot': None, 'active': True, 'shrink': True, 'opts': None, 'size': '4%VG'}}, 'msg': "Creating logical volume 'lv_5' failed"}, {'_ansible_parsed': True, '_ansible_item_result': True, '_ansible_no_log': False, 'err': ' /dev/vg_nvme/lv_4: not found: device not cleared\n Aborting. Failed to wipe start of new LV.\n', 'failed': True, 'changed': False, 'item': {'key': 'lv_4', 'value': {'scratch_dev': True, 'size': '24%VG', 'vg': 'vg_nvme'}}, 'rc': 5, 'invocation': {'module_args': {'pvs': None, 'force': False, 'vg': 'vg_nvme', 'lv': 'lv_4', 'state': 'present', 'snapshot': None, 'active': True, 'shrink': True, 'opts': None, 'size': '24%VG'}}, 'msg': "Creating logical volume 'lv_4' failed"}, {'_ansible_parsed': True, '_ansible_item_result': True, '_ansible_no_log': False, 'err': ' /dev/vg_nvme/lv_3: not found: device not cleared\n Aborting. Failed to wipe start of new LV.\n', 'failed': True, 'changed': False, 'item': {'key': 'lv_3', 'value': {'scratch_dev': True, 'size': '24%VG', 'vg': 'vg_nvme'}}, 'rc': 5, 'invocation': {'module_args': {'pvs': None, 'force': False, 'vg': 'vg_nvme', 'lv': 'lv_3', 'state': 'present', 'snapshot': None, 'active': True, 'shrink': True, 'opts': None, 'size': '24%VG'}}, 'msg': "Creating logical volume 'lv_3' failed"}, {'_ansible_parsed': True, '_ansible_item_result': True, '_ansible_no_log': False, 'err': ' /dev/vg_nvme/lv_2: not found: device not cleared\n Aborting. Failed to wipe start of new LV.\n', 'failed': True, 'changed': False, 'item': {'key': 'lv_2', 'value': {'scratch_dev': True, 'size': '24%VG', 'vg': 'vg_nvme'}}, 'rc': 5, 'invocation': {'module_args': {'pvs': None, 'force': False, 'vg': 'vg_nvme', 'lv': 'lv_2', 'state': 'present', 'snapshot': None, 'active': True, 'shrink': True, 'opts': None, 'size': '24%VG'}}, 'msg': "Creating logical volume 'lv_2' failed"}, {'_ansible_parsed': True, '_ansible_item_result': True, '_ansible_no_log': False, 'err': ' /dev/vg_nvme/lv_1: not found: device not cleared\n Aborting. Failed to wipe start of new LV.\n', 'failed': True, 'changed': False, 'item': {'key': 'lv_1', 'value': {'scratch_dev': True, 'size': '24%VG', 'vg': 'vg_nvme'}}, 'rc': 5, 'invocation': {'module_args': {'pvs': None, 'force': False, 'vg': 'vg_nvme', 'lv': 'lv_1', 'state': 'present', 'snapshot': None, 'active': True, 'shrink': True, 'opts': None, 'size': '24%VG'}}, 'msg': "Creating logical volume 'lv_1' failed"}]}}

Command failed on smithi098 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

Command failed on smithi137 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 0'

Command failed on smithi079 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 0'

Command failed on smithi073 with status 1: 'sudo package-cleanup -y --oldkernels'

Command failed on smithi071 with status 1: 'sudo adjust-ulimits ceph-coverage /home/ubuntu/cephtest/archive/coverage daemon-helper kill ceph-osd -f --cluster ceph -i 1'

'ssh_keyscan smithi154.front.sepia.ceph.com' reached maximum tries (5) after waiting for 5 seconds

Command failed on smithi095 with status 100: 'sudo DEBIAN_FRONTEND=noninteractive apt-get -y install linux-image-generic'