Pulpito :: Results Dashboard

Posted	Started	Updated	Runtime	Duration	In Waiting	Machine	Teuthology Branch	OS Type	OS Version	Nodes	Status
2016-02-04 17:02:10	2016-02-04 17:06:41	2016-02-04 17:25:06	0:18:25	0:08:48	0:09:37	vps	master	ubuntu		2	fail

Nodes: vpm096 vpm023

Description: rados/verify/{1thrash/none.yaml clusters/fixed-2.yaml fs/btrfs.yaml msgr-failures/few.yaml tasks/rados_cls_all.yaml validater/lockdep.yaml}

Log: http://qa-proxy.ceph.com/teuthology/teuthology-2016-02-04_09:00:01-rados-hammer-distro-basic-vps/6705/teuthology.log

Sentry event: http://sentry.ceph.com/sepia/teuthology/?q=9e865f6ebd92462594ad9423bf356225

Failure Reason:

/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ Resolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name\ \ or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019" stdout: "Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\ Reading '/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz'\n............................................................................DONE\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/02packages.details.txt.gz\n\ Reading '/home/ubuntu/.cpan/sources/modules/02packages.details.txt.gz'\n Database\ \ was generated on Thu, 04 Feb 2016 02:17:02 GMT\n.............\n New CPAN.pm\ \ version (v2.10) available.\n [Currently running version is v2.00]\n You might\ \ want to try\n install CPAN\n reload cpan\n to both upgrade CPAN.pm and\ \ run the new version without leaving\n the current session.\n\n\n...............................................................DONE\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/03modlist.data.gz\n\ Reading '/home/ubuntu/.cpan/sources/modules/03modlist.data.gz'\nDONE\nWriting\ \ /home/ubuntu/.cpan/Metadata\nRunning install for module 'Amazon::S3'\nRunning\ \ make for T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\ \ ok\n\n CPAN.pm: Building T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for Amazon::S3\nWriting MYMETA.yml\ \ and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- \ \ TIMA/Amazon-S3-0.45.tar.gz ----\n Digest::MD5::File [requires]\n\ \ Digest::HMAC_SHA1 [requires]\n LWP::UserAgent::Determined [requires]\n\ \ XML::Simple [requires]\nRunning make test\n Delayed until after prerequisites\n\ Running make install\n Delayed until after prerequisites\nRunning install for\ \ module 'Digest::MD5::File'\nRunning make for D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\ \ ok\n\n CPAN.pm: Building D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\nChecking\ \ if your kit is complete...\nLooks good\nWriting Makefile for Digest::MD5::File\n\ Writing MYMETA.yml and MYMETA.json\ncp File.pm blib/lib/Digest/MD5/File.pm\nManifying\ \ blib/man3/Digest::MD5::File.3pm\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make\ \ -- OK\n'YAML' not installed, will not store persistent state\nRunning make test\n\ PERL_DL_NONLAZY=1 /usr/bin/perl \"-MExtUtils::Command::MM\" \"-e\" \"test_harness(0,\ \ 'blib/lib', 'blib/arch')\" t/*.t\nt/1.t .. ok\nAll tests successful.\nFiles=1,\ \ Tests=6, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.10\ \ CPU)\nResult: PASS\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make test\ \ -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/Digest/MD5/File.pm\n\ Installing /usr/local/man/man3/Digest::MD5::File.3pm\nAppending installation info\ \ to /usr/local/lib/perl/5.18.2/perllocal.pod\n DMUEY/Digest-MD5-File-0.08.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'Digest::HMAC_SHA1'\n\ Running make for G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\ \ ok\n\n CPAN.pm: Building G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for Digest::HMAC\nWriting MYMETA.yml\ \ and MYMETA.json\ncp lib/Digest/HMAC_MD5.pm blib/lib/Digest/HMAC_MD5.pm\ncp lib/Digest/HMAC.pm\ \ blib/lib/Digest/HMAC.pm\ncp lib/Digest/HMAC_SHA1.pm blib/lib/Digest/HMAC_SHA1.pm\n\ Manifying blib/man3/Digest::HMAC_MD5.3pm\nManifying blib/man3/Digest::HMAC.3pm\n\ Manifying blib/man3/Digest::HMAC_SHA1.3pm\n GAAS/Digest-HMAC-1.03.tar.gz\n /usr/bin/make\ \ -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"-MExtUtils::Command::MM\"\ \ \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\" t/*.t\nt/rfc2202.t .. ok\n\ All tests successful.\nFiles=1, Tests=14, 0 wallclock secs ( 0.02 usr 0.00 sys\ \ + 0.01 cusr 0.00 csys = 0.03 CPU)\nResult: PASS\n GAAS/Digest-HMAC-1.03.tar.gz\n\ \ /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/Digest/HMAC_MD5.pm\n\ Installing /usr/local/share/perl/5.18.2/Digest/HMAC_SHA1.pm\nInstalling /usr/local/share/perl/5.18.2/Digest/HMAC.pm\n\ Installing /usr/local/man/man3/Digest::HMAC_MD5.3pm\nInstalling /usr/local/man/man3/Digest::HMAC_SHA1.3pm\n\ Installing /usr/local/man/man3/Digest::HMAC.3pm\nAppending installation info to\ \ /usr/local/lib/perl/5.18.2/perllocal.pod\n GAAS/Digest-HMAC-1.03.tar.gz\n \ \ /usr/bin/make install -- OK\nRunning install for module 'LWP::UserAgent::Determined'\n\ Running make for A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with\ \ LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\ \ ok\n\n CPAN.pm: Building A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \nChecking if your kit is complete...\nLooks good\nWriting Makefile for LWP::UserAgent::Determined\n\ Writing MYMETA.yml and MYMETA.json\ncp lib/LWP/UserAgent/Determined.pm blib/lib/LWP/UserAgent/Determined.pm\n\ Manifying blib/man3/LWP::UserAgent::Determined.3pm\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/01_about_verbose.t .... ok\nt/10_determined_test.t .. ok\nAll tests\ \ successful.\nFiles=2, Tests=15, 38 wallclock secs ( 0.03 usr 0.01 sys + 0.10\ \ cusr 0.01 csys = 0.15 CPU)\nResult: PASS\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/LWP/UserAgent/Determined.pm\n\ Installing /usr/local/man/man3/LWP::UserAgent::Determined.3pm\nAppending installation\ \ info to /usr/local/lib/perl/5.18.2/perllocal.pod\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'XML::Simple'\nRunning\ \ make for G/GR/GRANTM/XML-Simple-2.22.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\nChecking if\ \ your kit is complete...\nLooks good\nWriting Makefile for XML::Simple\nWriting\ \ MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n\ ---- GRANTM/XML-Simple-2.22.tar.gz ----\n XML::SAX [requires]\n\ \ XML::NamespaceSupport [requires]\n XML::SAX::Expat [requires]\nRunning\ \ make test\n Delayed until after prerequisites\nRunning make install\n Delayed\ \ until after prerequisites\nRunning install for module 'XML::SAX'\nRunning make\ \ for G/GR/GRANTM/XML-SAX-0.99.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for XML::SAX\nWriting MYMETA.yml\ \ and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- \ \ GRANTM/XML-SAX-0.99.tar.gz ----\n XML::NamespaceSupport [requires]\n\ \ XML::SAX::Base [requires]\nRunning make test\n Delayed until after prerequisites\n\ Running make install\n Delayed until after prerequisites\nRunning install for\ \ module 'XML::NamespaceSupport'\nRunning make for P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\ \ ok\n\n CPAN.pm: Building P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\n\ Checking if your kit is complete...\nLooks good\nWriting Makefile for XML::NamespaceSupport\n\ Writing MYMETA.yml and MYMETA.json\ncp lib/XML/NamespaceSupport.pm blib/lib/XML/NamespaceSupport.pm\n\ Manifying blib/man3/XML::NamespaceSupport.3pm\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'inc', 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/00base.t .. ok\nAll tests successful.\nFiles=1, Tests=48, 0 wallclock\ \ secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)\nResult: PASS\n\ \ PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make test -- OK\nRunning\ \ make install\nManifying blib/man3/XML::NamespaceSupport.3pm\nInstalling /usr/local/share/perl/5.18.2/XML/NamespaceSupport.pm\n\ Installing /usr/local/man/man3/XML::NamespaceSupport.3pm\nAppending installation\ \ info to /usr/local/lib/perl/5.18.2/perllocal.pod\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'XML::SAX::Base'\n\ Running make for G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\nChecking if\ \ your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Base\nWriting\ \ MYMETA.yml and MYMETA.json\ncp lib/XML/SAX/Exception.pm blib/lib/XML/SAX/Exception.pm\n\ cp BuildSAXBase.pl blib/lib/XML/SAX/BuildSAXBase.pl\ncp lib/XML/SAX/Base.pm blib/lib/XML/SAX/Base.pm\n\ Manifying blib/man3/XML::SAX::BuildSAXBase.3pm\nManifying blib/man3/XML::SAX::Base.3pm\n\ Manifying blib/man3/XML::SAX::Exception.3pm\n GRANTM/XML-SAX-Base-1.08.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/00basic.t ............. ok\nt/01exception.t ......... ok\nt/01simpledriver.t\ \ ...... ok\nt/02simplefilter.t ...... ok\nt/03chdriver.t .......... ok\nt/04chfilter.t\ \ .......... ok\nt/05dtdhdriver.t ........ ok\nt/06lexhdriver.t ........ ok\n\ t/07declhdriver.t ....... ok\nt/08errorhdriver.t ...... ok\nt/09resoldriver.t\ \ ....... ok\nt/10dochdriver.t ........ ok\nt/11sax1multiclass.t .... ok\nt/12sax2multiclass.t\ \ .... ok\nt/13handlerswitch.t ..... ok\nt/14downstreamswitch.t .. ok\nt/15parentswitch.t\ \ ...... ok\nt/16gethandlers.t ....... ok\nt/release-pod-syntax.t .. skipped:\ \ these tests are for release candidate testing\nAll tests successful.\nFiles=19,\ \ Tests=137, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.50 cusr 0.08 csys =\ \ 0.66 CPU)\nResult: PASS\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make\ \ test -- OK\nRunning make install\nManifying blib/man3/XML::SAX::BuildSAXBase.3pm\n\ Manifying blib/man3/XML::SAX::Base.3pm\nManifying blib/man3/XML::SAX::Exception.3pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/BuildSAXBase.pl\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Base.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/Exception.pm\nInstalling /usr/local/man/man3/XML::SAX::BuildSAXBase.3pm\n\ Installing /usr/local/man/man3/XML::SAX::Base.3pm\nInstalling /usr/local/man/man3/XML::SAX::Exception.3pm\n\ Appending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n GRANTM/XML-SAX-Base-1.08.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ \ Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-0.99-P283G8\n\ \n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ncp SAX/PurePerl/Reader/Stream.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/Stream.pm\ncp SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm\n\ cp SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm\ncp SAX.pm\ \ blib/lib/XML/SAX.pm\ncp SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm\n\ cp SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm\n\ cp SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm\ncp SAX/ParserFactory.pm\ \ blib/lib/XML/SAX/ParserFactory.pm\ncp SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm\n\ cp SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm\ncp SAX/PurePerl/NoUnicodeExt.pm\ \ blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/NoUnicodeExt.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/String.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/String.pm\ncp SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm\n\ cp SAX/Intro.pod blib/lib/XML/SAX/Intro.pod\ncp SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm\n\ cp SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm\n\ cp SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm\ncp SAX/PurePerl.pm\ \ blib/lib/XML/SAX/PurePerl.pm\ncp SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm\n\ Manifying blib/man3/XML::SAX.3pm\nManifying blib/man3/XML::SAX::DocumentLocator.3pm\n\ Manifying blib/man3/XML::SAX::ParserFactory.3pm\nManifying blib/man3/XML::SAX::PurePerl::Reader.3pm\n\ Manifying blib/man3/XML::SAX::PurePerl.3pm\nManifying blib/man3/XML::SAX::Intro.3pm\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1\ \ /usr/bin/perl \"-MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib',\ \ 'blib/arch')\" t/*.t\nt/00basic.t ...... ok\nt/01known.t ...... ok\nt/10xmldecl1.t\ \ ... ok\nt/11xmldecl2.t ... ok\nt/12miscstart.t .. ok\nt/13int_ent.t .... ok\n\ t/14encoding.t ... ok\nt/15element.t .... ok\nt/16large.t ...... ok\nt/20factory.t\ \ .... ok\nt/21saxini.t ..... ok\nt/40cdata.t ...... ok\nt/42entities.t ... ok\n\ t/99cleanup.t .... ok\nAll tests successful.\nFiles=14, Tests=106, 2 wallclock\ \ secs ( 0.07 usr 0.00 sys + 1.42 cusr 0.08 csys = 1.57 CPU)\nResult: PASS\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make test -- OK\nRunning make install\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/DocumentLocator.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/ParserFactory.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Intro.pod\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Productions.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DocType.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DebugHandler.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/XMLDecl.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/EncodingDetect.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Exception.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/NoUnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DTDDecls.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/UnicodeExt.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/String.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/Stream.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/URI.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/UnicodeExt.pm\nInstalling\ \ /usr/local/man/man3/XML::SAX::Intro.3pm\nInstalling /usr/local/man/man3/XML::SAX::DocumentLocator.3pm\n\ Installing /usr/local/man/man3/XML::SAX.3pm\nInstalling /usr/local/man/man3/XML::SAX::PurePerl.3pm\n\ Installing /usr/local/man/man3/XML::SAX::PurePerl::Reader.3pm\nInstalling /usr/local/man/man3/XML::SAX::ParserFactory.3pm\n\ Appending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\ncould\ \ not find ParserDetails.ini in /home/ubuntu/.cpan/build/XML-SAX-0.99-P283G8/blib/lib/XML/SAX\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make install -- OK\nRunning install\ \ for module 'XML::SAX::Expat'\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ LWP failed with code[500] message[Can't connect to apt-mirror.sepia.ceph.com:80\ \ (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ LWP failed with code[500] message[Can't connect to apt-mirror.sepia.ceph.com:80\ \ (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nNo external ftp command available\n\n\nTrying with\n /usr/bin/wget\ \ -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nNo external ftp command available\n\nPlease check, if the\ \ URLs I found in your configuration file\n(http://apt-mirror.sepia.ceph.com/CPAN/)\ \ are valid. The urllist can be\nedited. E.g. with 'o conf urllist push ftp://myurl/'\n\ \nCould not fetch authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz" warnings: []

All Details...

log_href: http://qa-proxy.ceph.com/teuthology/teuthology-2016-02-04_09:00:01-rados-hammer-distro-basic-vps/6705/teuthology.log
archive_path: /var/lib/teuthworker/archive/teuthology-2016-02-04_09:00:01-rados-hammer-distro-basic-vps/6705
description: rados/verify/{1thrash/none.yaml clusters/fixed-2.yaml fs/btrfs.yaml msgr-failures/few.yaml tasks/rados_cls_all.yaml validater/lockdep.yaml}
duration: 0:08:48
email: ceph-qa@ceph.com
failure_reason: /id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ Resolving apt-mirror.sepia.ceph.com (apt-mirror.sepia.ceph.com)... failed: Name\ \ or service not known.\nwget: unable to resolve host address \u2018apt-mirror.sepia.ceph.com\u2019" stdout: "Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\n\ Reading '/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz'\n............................................................................DONE\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/02packages.details.txt.gz\n\ Reading '/home/ubuntu/.cpan/sources/modules/02packages.details.txt.gz'\n Database\ \ was generated on Thu, 04 Feb 2016 02:17:02 GMT\n.............\n New CPAN.pm\ \ version (v2.10) available.\n [Currently running version is v2.00]\n You might\ \ want to try\n install CPAN\n reload cpan\n to both upgrade CPAN.pm and\ \ run the new version without leaving\n the current session.\n\n\n...............................................................DONE\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/modules/03modlist.data.gz\n\ Reading '/home/ubuntu/.cpan/sources/modules/03modlist.data.gz'\nDONE\nWriting\ \ /home/ubuntu/.cpan/Metadata\nRunning install for module 'Amazon::S3'\nRunning\ \ make for T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\ \ ok\n\n CPAN.pm: Building T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for Amazon::S3\nWriting MYMETA.yml\ \ and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- \ \ TIMA/Amazon-S3-0.45.tar.gz ----\n Digest::MD5::File [requires]\n\ \ Digest::HMAC_SHA1 [requires]\n LWP::UserAgent::Determined [requires]\n\ \ XML::Simple [requires]\nRunning make test\n Delayed until after prerequisites\n\ Running make install\n Delayed until after prerequisites\nRunning install for\ \ module 'Digest::MD5::File'\nRunning make for D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\ \ ok\n\n CPAN.pm: Building D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\nChecking\ \ if your kit is complete...\nLooks good\nWriting Makefile for Digest::MD5::File\n\ Writing MYMETA.yml and MYMETA.json\ncp File.pm blib/lib/Digest/MD5/File.pm\nManifying\ \ blib/man3/Digest::MD5::File.3pm\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make\ \ -- OK\n'YAML' not installed, will not store persistent state\nRunning make test\n\ PERL_DL_NONLAZY=1 /usr/bin/perl \"-MExtUtils::Command::MM\" \"-e\" \"test_harness(0,\ \ 'blib/lib', 'blib/arch')\" t/*.t\nt/1.t .. ok\nAll tests successful.\nFiles=1,\ \ Tests=6, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.10\ \ CPU)\nResult: PASS\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make test\ \ -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/Digest/MD5/File.pm\n\ Installing /usr/local/man/man3/Digest::MD5::File.3pm\nAppending installation info\ \ to /usr/local/lib/perl/5.18.2/perllocal.pod\n DMUEY/Digest-MD5-File-0.08.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'Digest::HMAC_SHA1'\n\ Running make for G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\ \ ok\n\n CPAN.pm: Building G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for Digest::HMAC\nWriting MYMETA.yml\ \ and MYMETA.json\ncp lib/Digest/HMAC_MD5.pm blib/lib/Digest/HMAC_MD5.pm\ncp lib/Digest/HMAC.pm\ \ blib/lib/Digest/HMAC.pm\ncp lib/Digest/HMAC_SHA1.pm blib/lib/Digest/HMAC_SHA1.pm\n\ Manifying blib/man3/Digest::HMAC_MD5.3pm\nManifying blib/man3/Digest::HMAC.3pm\n\ Manifying blib/man3/Digest::HMAC_SHA1.3pm\n GAAS/Digest-HMAC-1.03.tar.gz\n /usr/bin/make\ \ -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"-MExtUtils::Command::MM\"\ \ \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\" t/*.t\nt/rfc2202.t .. ok\n\ All tests successful.\nFiles=1, Tests=14, 0 wallclock secs ( 0.02 usr 0.00 sys\ \ + 0.01 cusr 0.00 csys = 0.03 CPU)\nResult: PASS\n GAAS/Digest-HMAC-1.03.tar.gz\n\ \ /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/Digest/HMAC_MD5.pm\n\ Installing /usr/local/share/perl/5.18.2/Digest/HMAC_SHA1.pm\nInstalling /usr/local/share/perl/5.18.2/Digest/HMAC.pm\n\ Installing /usr/local/man/man3/Digest::HMAC_MD5.3pm\nInstalling /usr/local/man/man3/Digest::HMAC_SHA1.3pm\n\ Installing /usr/local/man/man3/Digest::HMAC.3pm\nAppending installation info to\ \ /usr/local/lib/perl/5.18.2/perllocal.pod\n GAAS/Digest-HMAC-1.03.tar.gz\n \ \ /usr/bin/make install -- OK\nRunning install for module 'LWP::UserAgent::Determined'\n\ Running make for A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with\ \ LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\ \ ok\n\n CPAN.pm: Building A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \nChecking if your kit is complete...\nLooks good\nWriting Makefile for LWP::UserAgent::Determined\n\ Writing MYMETA.yml and MYMETA.json\ncp lib/LWP/UserAgent/Determined.pm blib/lib/LWP/UserAgent/Determined.pm\n\ Manifying blib/man3/LWP::UserAgent::Determined.3pm\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/01_about_verbose.t .... ok\nt/10_determined_test.t .. ok\nAll tests\ \ successful.\nFiles=2, Tests=15, 38 wallclock secs ( 0.03 usr 0.01 sys + 0.10\ \ cusr 0.01 csys = 0.15 CPU)\nResult: PASS\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.18.2/LWP/UserAgent/Determined.pm\n\ Installing /usr/local/man/man3/LWP::UserAgent::Determined.3pm\nAppending installation\ \ info to /usr/local/lib/perl/5.18.2/perllocal.pod\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'XML::Simple'\nRunning\ \ make for G/GR/GRANTM/XML-Simple-2.22.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-Simple-2.22.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-Simple-2.22.tar.gz\n\nChecking if\ \ your kit is complete...\nLooks good\nWriting Makefile for XML::Simple\nWriting\ \ MYMETA.yml and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n\ ---- GRANTM/XML-Simple-2.22.tar.gz ----\n XML::SAX [requires]\n\ \ XML::NamespaceSupport [requires]\n XML::SAX::Expat [requires]\nRunning\ \ make test\n Delayed until after prerequisites\nRunning make install\n Delayed\ \ until after prerequisites\nRunning install for module 'XML::SAX'\nRunning make\ \ for G/GR/GRANTM/XML-SAX-0.99.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\nChecking if your\ \ kit is complete...\nLooks good\nWriting Makefile for XML::SAX\nWriting MYMETA.yml\ \ and MYMETA.json\n---- Unsatisfied dependencies detected during ----\n---- \ \ GRANTM/XML-SAX-0.99.tar.gz ----\n XML::NamespaceSupport [requires]\n\ \ XML::SAX::Base [requires]\nRunning make test\n Delayed until after prerequisites\n\ Running make install\n Delayed until after prerequisites\nRunning install for\ \ module 'XML::NamespaceSupport'\nRunning make for P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/CHECKSUMS\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\ \ ok\n\n CPAN.pm: Building P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\n\ Checking if your kit is complete...\nLooks good\nWriting Makefile for XML::NamespaceSupport\n\ Writing MYMETA.yml and MYMETA.json\ncp lib/XML/NamespaceSupport.pm blib/lib/XML/NamespaceSupport.pm\n\ Manifying blib/man3/XML::NamespaceSupport.3pm\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'inc', 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/00base.t .. ok\nAll tests successful.\nFiles=1, Tests=48, 0 wallclock\ \ secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)\nResult: PASS\n\ \ PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make test -- OK\nRunning\ \ make install\nManifying blib/man3/XML::NamespaceSupport.3pm\nInstalling /usr/local/share/perl/5.18.2/XML/NamespaceSupport.pm\n\ Installing /usr/local/man/man3/XML::NamespaceSupport.3pm\nAppending installation\ \ info to /usr/local/lib/perl/5.18.2/perllocal.pod\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning install for module 'XML::SAX::Base'\n\ Running make for G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\ Checksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\ \ ok\n\n CPAN.pm: Building G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\nChecking if\ \ your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Base\nWriting\ \ MYMETA.yml and MYMETA.json\ncp lib/XML/SAX/Exception.pm blib/lib/XML/SAX/Exception.pm\n\ cp BuildSAXBase.pl blib/lib/XML/SAX/BuildSAXBase.pl\ncp lib/XML/SAX/Base.pm blib/lib/XML/SAX/Base.pm\n\ Manifying blib/man3/XML::SAX::BuildSAXBase.3pm\nManifying blib/man3/XML::SAX::Base.3pm\n\ Manifying blib/man3/XML::SAX::Exception.3pm\n GRANTM/XML-SAX-Base-1.08.tar.gz\n\ \ /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl \"\ -MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib', 'blib/arch')\"\ \ t/*.t\nt/00basic.t ............. ok\nt/01exception.t ......... ok\nt/01simpledriver.t\ \ ...... ok\nt/02simplefilter.t ...... ok\nt/03chdriver.t .......... ok\nt/04chfilter.t\ \ .......... ok\nt/05dtdhdriver.t ........ ok\nt/06lexhdriver.t ........ ok\n\ t/07declhdriver.t ....... ok\nt/08errorhdriver.t ...... ok\nt/09resoldriver.t\ \ ....... ok\nt/10dochdriver.t ........ ok\nt/11sax1multiclass.t .... ok\nt/12sax2multiclass.t\ \ .... ok\nt/13handlerswitch.t ..... ok\nt/14downstreamswitch.t .. ok\nt/15parentswitch.t\ \ ...... ok\nt/16gethandlers.t ....... ok\nt/release-pod-syntax.t .. skipped:\ \ these tests are for release candidate testing\nAll tests successful.\nFiles=19,\ \ Tests=137, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.50 cusr 0.08 csys =\ \ 0.66 CPU)\nResult: PASS\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make\ \ test -- OK\nRunning make install\nManifying blib/man3/XML::SAX::BuildSAXBase.3pm\n\ Manifying blib/man3/XML::SAX::Base.3pm\nManifying blib/man3/XML::SAX::Exception.3pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/BuildSAXBase.pl\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Base.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/Exception.pm\nInstalling /usr/local/man/man3/XML::SAX::BuildSAXBase.3pm\n\ Installing /usr/local/man/man3/XML::SAX::Base.3pm\nInstalling /usr/local/man/man3/XML::SAX::Exception.3pm\n\ Appending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\n GRANTM/XML-SAX-Base-1.08.tar.gz\n\ \ /usr/bin/make install -- OK\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ \ Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-0.99-P283G8\n\ \n CPAN.pm: Building G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ncp SAX/PurePerl/Reader/Stream.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/Stream.pm\ncp SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm\n\ cp SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm\ncp SAX.pm\ \ blib/lib/XML/SAX.pm\ncp SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm\n\ cp SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm\n\ cp SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm\ncp SAX/ParserFactory.pm\ \ blib/lib/XML/SAX/ParserFactory.pm\ncp SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm\n\ cp SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm\ncp SAX/PurePerl/NoUnicodeExt.pm\ \ blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/NoUnicodeExt.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/String.pm\ \ blib/lib/XML/SAX/PurePerl/Reader/String.pm\ncp SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm\n\ cp SAX/Intro.pod blib/lib/XML/SAX/Intro.pod\ncp SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm\n\ cp SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm\n\ cp SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm\ncp SAX/PurePerl.pm\ \ blib/lib/XML/SAX/PurePerl.pm\ncp SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm\n\ Manifying blib/man3/XML::SAX.3pm\nManifying blib/man3/XML::SAX::DocumentLocator.3pm\n\ Manifying blib/man3/XML::SAX::ParserFactory.3pm\nManifying blib/man3/XML::SAX::PurePerl::Reader.3pm\n\ Manifying blib/man3/XML::SAX::PurePerl.3pm\nManifying blib/man3/XML::SAX::Intro.3pm\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1\ \ /usr/bin/perl \"-MExtUtils::Command::MM\" \"-e\" \"test_harness(0, 'blib/lib',\ \ 'blib/arch')\" t/*.t\nt/00basic.t ...... ok\nt/01known.t ...... ok\nt/10xmldecl1.t\ \ ... ok\nt/11xmldecl2.t ... ok\nt/12miscstart.t .. ok\nt/13int_ent.t .... ok\n\ t/14encoding.t ... ok\nt/15element.t .... ok\nt/16large.t ...... ok\nt/20factory.t\ \ .... ok\nt/21saxini.t ..... ok\nt/40cdata.t ...... ok\nt/42entities.t ... ok\n\ t/99cleanup.t .... ok\nAll tests successful.\nFiles=14, Tests=106, 2 wallclock\ \ secs ( 0.07 usr 0.00 sys + 1.42 cusr 0.08 csys = 1.57 CPU)\nResult: PASS\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make test -- OK\nRunning make install\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/DocumentLocator.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/ParserFactory.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/Intro.pod\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Productions.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DocType.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DebugHandler.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/XMLDecl.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/EncodingDetect.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Exception.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/NoUnicodeExt.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/DTDDecls.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/UnicodeExt.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/String.pm\nInstalling /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/Stream.pm\n\ Installing /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/URI.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\nInstalling\ \ /usr/local/share/perl/5.18.2/XML/SAX/PurePerl/Reader/UnicodeExt.pm\nInstalling\ \ /usr/local/man/man3/XML::SAX::Intro.3pm\nInstalling /usr/local/man/man3/XML::SAX::DocumentLocator.3pm\n\ Installing /usr/local/man/man3/XML::SAX.3pm\nInstalling /usr/local/man/man3/XML::SAX::PurePerl.3pm\n\ Installing /usr/local/man/man3/XML::SAX::PurePerl::Reader.3pm\nInstalling /usr/local/man/man3/XML::SAX::ParserFactory.3pm\n\ Appending installation info to /usr/local/lib/perl/5.18.2/perllocal.pod\ncould\ \ not find ParserDetails.ini in /home/ubuntu/.cpan/build/XML-SAX-0.99-P283G8/blib/lib/XML/SAX\n\ \ GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make install -- OK\nRunning install\ \ for module 'XML::SAX::Expat'\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ Fetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ LWP failed with code[500] message[Can't connect to apt-mirror.sepia.ceph.com:80\ \ (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nFetching with LWP:\nhttp://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ LWP failed with code[500] message[Can't connect to apt-mirror.sepia.ceph.com:80\ \ (Bad hostname)]\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\n\nTrying with\n /usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nNo external ftp command available\n\n\nTrying with\n /usr/bin/wget\ \ -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \nto get\n http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\ \n Function system(\"/usr/bin/wget -O \"/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\"\ \ \"http://apt-mirror.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\"\ \ \")\n returned status 4 (wstat 1024), left\n/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867\ \ with size 0\n Warning: no success downloading '/home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz.tmp8867'.\ \ Giving up on it.\nNo external ftp command available\n\nPlease check, if the\ \ URLs I found in your configuration file\n(http://apt-mirror.sepia.ceph.com/CPAN/)\ \ are valid. The urllist can be\nedited. E.g. with 'o conf urllist push ftp://myurl/'\n\ \nCould not fetch authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz" warnings: []
flavor:
job_id: 6705
kernel:
- sha1: distro
- kdb: True
last_in_suite: False
machine_type: vps
name: teuthology-2016-02-04_09:00:01-rados-hammer-distro-basic-vps
nuke_on_error: True
os_type: ubuntu
os_version:
overrides:
- ceph:
  - log-whitelist:
    - slow request
  - fs: btrfs
  - conf:
    - global:
      - ms inject socket failures: 5000
      - lockdep: True
    - mon:
      - debug mon: 20
      - debug paxos: 20
      - debug ms: 1
    - osd:
      - debug ms: 1
      - debug journal: 20
      - debug osd: 20
      - osd sloppy crc: True
      - osd op thread timeout: 60
      - debug filestore: 20
  - sha1: f3bab8c7bc6bba3c79329d7106684596634e17a6
- ceph-deploy:
  - conf:
    - client:
      - log file: /var/log/ceph/ceph-$name.$pid.log
    - mon:
      - osd default pool size: 2
      - debug mon: 1
      - debug paxos: 20
      - debug ms: 20
  - branch:
    - dev-commit: f3bab8c7bc6bba3c79329d7106684596634e17a6
- workunit:
  - sha1: f3bab8c7bc6bba3c79329d7106684596634e17a6
- install:
  - ceph:
    - sha1: f3bab8c7bc6bba3c79329d7106684596634e17a6
- admin_socket:
  - branch: hammer
owner: scheduled_teuthology@teuthology
pid:
roles:
- ['mon.a', 'mon.c', 'osd.0', 'osd.1', 'osd.2', 'client.0']
- ['mon.b', 'osd.3', 'osd.4', 'osd.5', 'client.1']
sentry_event: http://sentry.ceph.com/sepia/teuthology/?q=9e865f6ebd92462594ad9423bf356225
status: fail
success: False
branch:
seed:
sha1:
subset:
suite:
suite_branch: hammer
suite_path:
suite_relpath:
suite_repo:
suite_sha1:
targets:
- ubuntu@vpm096.front.sepia.ceph.com: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCfizxMFjOkhpOXC18OVg8xzLxZe5ySpAbUyhc0JVxTRo/5is03rqQ0G+n7qUKQyR92BcplWRJ1t7AxWzdd5C2iFXJ2ICwXvFqcJPAikFLlke3s/dFm21ZF49jIcvhrmud60/uqxBq8Lbb4rVZu8gykh8gGbfWepcu+0QVTvlfg4hLjG1jPV1tTK+8SA9mqqlTmHVbGfuUCYVmSqGHEA0zql3CjHMPGr6jmCg+k4Y5OENU/IufjgjlWlvDfs0pLcERZAMHldY6n2rYSi6SQ0xEzArI5DgO26ziSqhfCEGfFKO1VWjjoxGRjjLmigFhjA+gtXRA4/PIl/tqHpI7qRHUB
- ubuntu@vpm023.front.sepia.ceph.com: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDPL00ln9YskxhXST1XE5DHhPv/8nUn+i5b0MD4s/CxVOArVsjj3ABPOS5Qoz1kzyiCwdluIqxTmhM8GtGtdiwZiDkysZXVn2OWA0j9ql76X7s+Wpd2/Vuxi9QtKKWJdZtk87qMghWo+cyYzPW5Siufs2xEudedXlLV8KZB25S8hoi/aMO+1ksD+RXSqh6DoPSEt+Gyp1/k9Tlt0/mzrr71w6MswQo8CnRfAxfiNDzDgHecrMYnJidKs3gF3UpGB3PLRWrfnquoaBheCjKdwhqkFxe758RApZCBJDTsMm+cG3Ncy+MvgjWNTX5zAlqfsQjU1QKAvDMqNv51bL08TLBt
tasks:
- internal.check_packages:
- internal.buildpackages_prep:
- internal.lock_machines:
  - 2
  - vps
- internal.save_config:
- internal.check_lock:
- internal.add_remotes:
- internal.connect:
- internal.push_inventory:
- internal.serialize_remote_roles:
- internal.check_conflict:
- internal.check_ceph_data:
- internal.vm_setup:
- kernel:
  - sha1: distro
  - kdb: True
- internal.base:
- internal.archive_upload:
- internal.archive:
- internal.coredump:
- internal.sudo:
- internal.syslog:
- internal.timer:
- selinux:
- ansible.cephlab:
- clock.check:
- install:
- ceph:
- workunit:
  - clients:
    - client.0:
      - cls
teuthology_branch: master
verbose: True
pcp_grafana_url:
priority:
user:
queue:
posted: 2016-02-04 17:02:10
started: 2016-02-04 17:06:41
updated: 2016-02-04 17:25:06
status_class: danger
runtime: 0:18:25
wait_time: 0:09:37