teuthology-2015-09-28_16:05:07-upgrade:hammer-hammer-distro-basic-vps/1074271

Description: upgrade:hammer/older/{0-cluster/start.yaml 1-install/v0.94.1.yaml 2-workload/rbd.yaml 3-upgrade-sequence/upgrade-osd-mon-mds.yaml 4-final/{monthrash.yaml osdthrash.yaml testrados.yaml} distros/ubuntu_12.04.yaml}

Log: http://qa-proxy.ceph.com/teuthology/teuthology-2015-09-28_16:05:07-upgrade:hammer-hammer-distro-basic-vps/1074271/teuthology.log

Sentry event: http://sentry.ceph.com/sepia/teuthology/search?q=31b88abea04c401b82aaae9ec79decb4

Failure Reason:

{'vpm043.front.sepia.ceph.com': {'cmd': ['cpan', 'Amazon::S3'], 'end': '2015-09-29 01:19:02.180879', 'stdout': 'Fetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/01mailrc.txt.gz\nGoing to read \'/home/ubuntu/.cpan/sources/authors/01mailrc.txt.gz\'\n............................................................................DONE\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/modules/02packages.details.txt.gz\nGoing to read \'/home/ubuntu/.cpan/sources/modules/02packages.details.txt.gz\'\n Database was generated on Mon, 28 Sep 2015 20:53:33 GMT\n..............\n New CPAN.pm version (v2.10) available.\n [Currently running version is v1.960001]\n You might want to try\n install CPAN\n reload cpan\n to both upgrade CPAN.pm and run the new version without leaving\n the current session.\n\n\n..............................................................DONE\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/modules/03modlist.data.gz\nGoing to read \'/home/ubuntu/.cpan/sources/modules/03modlist.data.gz\'\nDONE\nGoing to write /home/ubuntu/.cpan/Metadata\nRunning install for module \'Amazon::S3\'\nRunning make for T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/T/TI/TIMA/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/T/TI/TIMA/Amazon-S3-0.45.tar.gz ok\n\n CPAN.pm: Going to build T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for Amazon::S3\nWriting MYMETA.yml\n---- Unsatisfied dependencies detected during ----\n---- TIMA/Amazon-S3-0.45.tar.gz ----\n XML::Simple [requires]\n Digest::HMAC_SHA1 [requires]\n Digest::MD5::File [requires]\n LWP::UserAgent::Determined [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::Simple\'\nRunning make for G/GR/GRANTM/XML-Simple-2.20.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-Simple-2.20.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-Simple-2.20.tar.gz ok\n\n CPAN.pm: Going to build G/GR/GRANTM/XML-Simple-2.20.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::Simple\nWriting MYMETA.yml\n---- Unsatisfied dependencies detected during ----\n---- GRANTM/XML-Simple-2.20.tar.gz ----\n XML::SAX [requires]\n XML::NamespaceSupport [requires]\n XML::SAX::Expat [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::SAX\'\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz ok\n\n CPAN.pm: Going to build G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX\nWriting MYMETA.yml\n---- Unsatisfied dependencies detected during ----\n---- GRANTM/XML-SAX-0.99.tar.gz ----\n XML::NamespaceSupport [requires]\n XML::SAX::Base [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::NamespaceSupport\'\nRunning make for P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/P/PE/PERIGRIN/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz ok\n\n CPAN.pm: Going to build P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::NamespaceSupport\nWriting MYMETA.yml\ncp lib/XML/NamespaceSupport.pm blib/lib/XML/NamespaceSupport.pm\nManifying blib/man3/XML::NamespaceSupport.3pm\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make -- OK\n\'YAML\' not installed, will not store persistent state\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'inc\', \'blib/lib\', \'blib/arch\')" t/*.t\nt/00base.t .. ok\nAll tests successful.\nFiles=1, Tests=48, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.03 cusr 0.00 csys = 0.08 CPU)\nResult: PASS\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/XML::NamespaceSupport.3pm\nInstalling /usr/local/share/perl/5.14.2/XML/NamespaceSupport.pm\nInstalling /usr/local/man/man3/XML::NamespaceSupport.3pm\nAppending installation info to /usr/local/lib/perl/5.14.2/perllocal.pod\n PERIGRIN/XML-NamespaceSupport-1.11.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'XML::SAX::Base\'\nRunning make for G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz ok\n\n CPAN.pm: Going to build G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Base\nWriting MYMETA.yml\ncp BuildSAXBase.pl blib/lib/XML/SAX/BuildSAXBase.pl\ncp lib/XML/SAX/Base.pm blib/lib/XML/SAX/Base.pm\ncp lib/XML/SAX/Exception.pm blib/lib/XML/SAX/Exception.pm\nManifying blib/man3/XML::SAX::Base.3pm\nManifying blib/man3/XML::SAX::BuildSAXBase.3pm\nManifying blib/man3/XML::SAX::Exception.3pm\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ............. ok\nt/01exception.t ......... ok\nt/01simpledriver.t ...... ok\nt/02simplefilter.t ...... ok\nt/03chdriver.t .......... ok\nt/04chfilter.t .......... ok\nt/05dtdhdriver.t ........ ok\nt/06lexhdriver.t ........ ok\nt/07declhdriver.t ....... ok\nt/08errorhdriver.t ...... ok\nt/09resoldriver.t ....... ok\nt/10dochdriver.t ........ ok\nt/11sax1multiclass.t .... ok\nt/12sax2multiclass.t .... ok\nt/13handlerswitch.t ..... ok\nt/14downstreamswitch.t .. ok\nt/15parentswitch.t ...... ok\nt/16gethandlers.t ....... ok\nt/release-pod-syntax.t .. skipped: these tests are for release candidate testing\nAll tests successful.\nFiles=19, Tests=137, 0 wallclock secs ( 0.06 usr 0.02 sys + 0.48 cusr 0.04 csys = 0.60 CPU)\nResult: PASS\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nInstalling /usr/local/share/perl/5.14.2/XML/SAX/Exception.pm\nInstalling /usr/local/share/perl/5.14.2/XML/SAX/Base.pm\nInstalling /usr/local/share/perl/5.14.2/XML/SAX/BuildSAXBase.pl\nInstalling /usr/local/man/man3/XML::SAX::BuildSAXBase.3pm\nInstalling /usr/local/man/man3/XML::SAX::Exception.3pm\nInstalling /usr/local/man/man3/XML::SAX::Base.3pm\nAppending installation info to /usr/local/lib/perl/5.14.2/perllocal.pod\n GRANTM/XML-SAX-Base-1.08.tar.gz\n /usr/bin/make install -- OK\nRunning make for G/GR/GRANTM/XML-SAX-0.99.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-0.99-qtOoMb\n\n CPAN.pm: Going to build G/GR/GRANTM/XML-SAX-0.99.tar.gz\n\ncp SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm\ncp SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm\ncp SAX/ParserFactory.pm blib/lib/XML/SAX/ParserFactory.pm\ncp SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm\ncp SAX/PurePerl/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm\ncp SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm\ncp SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm\ncp SAX/PurePerl/Reader/Stream.pm blib/lib/XML/SAX/PurePerl/Reader/Stream.pm\ncp SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm\ncp SAX.pm blib/lib/XML/SAX.pm\ncp SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm\ncp SAX/PurePerl/Reader/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm\ncp SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm\ncp SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm\ncp SAX/PurePerl/Reader/String.pm blib/lib/XML/SAX/PurePerl/Reader/String.pm\ncp SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm\ncp SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm\ncp SAX/Intro.pod blib/lib/XML/SAX/Intro.pod\ncp SAX/PurePerl.pm blib/lib/XML/SAX/PurePerl.pm\ncp SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm\nManifying blib/man3/XML::SAX::DocumentLocator.3pm\nManifying blib/man3/XML::SAX.3pm\nManifying blib/man3/XML::SAX::PurePerl.3pm\nManifying blib/man3/XML::SAX::Intro.3pm\nManifying blib/man3/XML::SAX::ParserFactory.3pm\nManifying blib/man3/XML::SAX::PurePerl::Reader.3pm\n GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ...... ok\nt/01known.t ...... ok\nt/10xmldecl1.t ... ok\nt/11xmldecl2.t ... ok\nt/12miscstart.t .. ok\nt/13int_ent.t .... ok\nt/14encoding.t ... ok\nt/15element.t .... \nDubious, test returned 255 (wstat 65280, 0xff00)\nFailed 17/32 subtests \nt/16large.t ...... ok\nt/20factory.t .... ok\nt/21saxini.t ..... ok\nt/40cdata.t ...... ok\nt/42entities.t ... ok\nt/99cleanup.t .... ok\n\nTest Summary Report\n-------------------\nt/15element.t (Wstat: 65280 Tests: 15 Failed: 0)\n Non-zero exit status: 255\n Parse errors: Bad plan. You planned 32 tests but ran 15.\nFiles=14, Tests=89, 2 wallclock secs ( 0.07 usr 0.01 sys + 1.16 cusr 0.14 csys = 1.38 CPU)\nResult: FAIL\n GRANTM/XML-SAX-0.99.tar.gz\n /usr/bin/make test -- NOT OK\n//hint// to see the cpan-testers results for installing this module, try:\n reports GRANTM/XML-SAX-0.99.tar.gz\nRunning make install\n make test had returned bad status, won\'t install without force\nRunning install for module \'XML::SAX::Expat\'\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/B/BJ/BJOERN/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz ok\n\n CPAN.pm: Going to build B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for XML::SAX::Expat\nWriting MYMETA.yml\n---- Unsatisfied dependencies detected during ----\n---- BJOERN/XML-SAX-Expat-0.51.tar.gz ----\n XML::SAX [requires]\nRunning make test\n Delayed until after prerequisites\nRunning make install\n Delayed until after prerequisites\nRunning install for module \'XML::SAX\'\nRunning make install\n make test had returned bad status, won\'t install without force\nRunning make for B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-SAX-Expat-0.51-nf2TUZ\n\n CPAN.pm: Going to build B/BJ/BJOERN/XML-SAX-Expat-0.51.tar.gz\n\nWarning: Prerequisite \'XML::SAX => 0.03\' for \'BJOERN/XML-SAX-Expat-0.51.tar.gz\' failed when processing \'GRANTM/XML-SAX-0.99.tar.gz\' with \'make_test => NO\'. Continuing, but chances to succeed are limited.\ncp Expat.pm blib/lib/XML/SAX/Expat.pm\nManifying blib/man3/XML::SAX::Expat.3pm\n BJOERN/XML-SAX-Expat-0.51.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/00basic.t ... ok\nt/98podsyn.t .. skipped: Test::Pod 1.00 required for testing POD\nt/99podcov.t .. skipped: Test::Pod::Coverage required for testing pod coverage\nAll tests successful.\nFiles=3, Tests=1, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.07 cusr 0.00 csys = 0.11 CPU)\nResult: PASS\n BJOERN/XML-SAX-Expat-0.51.tar.gz\nTests succeeded but one dependency not OK (XML::SAX)\n BJOERN/XML-SAX-Expat-0.51.tar.gz\n [dependencies] -- NA\nRunning make install\n make test had returned bad status, won\'t install without force\nRunning make for G/GR/GRANTM/XML-Simple-2.20.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/XML-Simple-2.20-kBOUSv\n\n CPAN.pm: Going to build G/GR/GRANTM/XML-Simple-2.20.tar.gz\n\nWarning: Prerequisite \'XML::SAX => 0.15\' for \'GRANTM/XML-Simple-2.20.tar.gz\' failed when processing \'GRANTM/XML-SAX-0.99.tar.gz\' with \'make_test => NO\'. Continuing, but chances to succeed are limited.\nWarning: Prerequisite \'XML::SAX::Expat => 0\' for \'GRANTM/XML-Simple-2.20.tar.gz\' failed when processing \'BJOERN/XML-SAX-Expat-0.51.tar.gz\' with \'make_test => NO one dependency not OK (XML::SAX)\'. Continuing, but chances to succeed are limited.\ncp lib/XML/Simple/FAQ.pod blib/lib/XML/Simple/FAQ.pod\ncp lib/XML/Simple.pm blib/lib/XML/Simple.pm\nManifying blib/man3/XML::Simple::FAQ.3pm\nManifying blib/man3/XML::Simple.3pm\n GRANTM/XML-Simple-2.20.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/0_Config.t ............ ok\nt/1_XMLin.t ............. ok\nt/2_XMLout.t ............ ok\nt/3_Storable.t .......... ok\nt/4_MemShare.t .......... ok\nt/5_MemCopy.t ........... ok\nt/6_ObjIntf.t ........... ok\nt/7_SaxStuff.t .......... skipped: no XML::SAX\nt/8_Namespaces.t ........ skipped: no XML::SAX\nt/9_Strict.t ............ ok\nt/A_XMLParser.t ......... ok\nt/B_Hooks.t ............. ok\nt/release-pod-syntax.t .. skipped: these tests are for release candidate testing\nAll tests successful.\nFiles=13, Tests=478, 12 wallclock secs ( 0.09 usr 0.02 sys + 1.03 cusr 0.10 csys = 1.24 CPU)\nResult: PASS\n GRANTM/XML-Simple-2.20.tar.gz\nTests succeeded but 2 dependencies missing (XML::SAX,XML::SAX::Expat)\n GRANTM/XML-Simple-2.20.tar.gz\n [dependencies] -- NA\nRunning make install\n make test had returned bad status, won\'t install without force\nRunning install for module \'Digest::HMAC_SHA1\'\nRunning make for G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/G/GA/GAAS/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/G/GA/GAAS/Digest-HMAC-1.03.tar.gz ok\n\n CPAN.pm: Going to build G/GA/GAAS/Digest-HMAC-1.03.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for Digest::HMAC\nWriting MYMETA.yml\ncp lib/Digest/HMAC_MD5.pm blib/lib/Digest/HMAC_MD5.pm\ncp lib/Digest/HMAC.pm blib/lib/Digest/HMAC.pm\ncp lib/Digest/HMAC_SHA1.pm blib/lib/Digest/HMAC_SHA1.pm\nManifying blib/man3/Digest::HMAC_MD5.3pm\nManifying blib/man3/Digest::HMAC.3pm\nManifying blib/man3/Digest::HMAC_SHA1.3pm\n GAAS/Digest-HMAC-1.03.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/rfc2202.t .. ok\nAll tests successful.\nFiles=1, Tests=14, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.00 csys = 0.04 CPU)\nResult: PASS\n GAAS/Digest-HMAC-1.03.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/Digest::HMAC_MD5.3pm\nManifying blib/man3/Digest::HMAC.3pm\nManifying blib/man3/Digest::HMAC_SHA1.3pm\nInstalling /usr/local/share/perl/5.14.2/Digest/HMAC.pm\nInstalling /usr/local/share/perl/5.14.2/Digest/HMAC_SHA1.pm\nInstalling /usr/local/share/perl/5.14.2/Digest/HMAC_MD5.pm\nInstalling /usr/local/man/man3/Digest::HMAC.3pm\nInstalling /usr/local/man/man3/Digest::HMAC_MD5.3pm\nInstalling /usr/local/man/man3/Digest::HMAC_SHA1.3pm\nAppending installation info to /usr/local/lib/perl/5.14.2/perllocal.pod\n GAAS/Digest-HMAC-1.03.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'Digest::MD5::File\'\nRunning make for D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/D/DM/DMUEY/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz ok\n\n CPAN.pm: Going to build D/DM/DMUEY/Digest-MD5-File-0.08.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for Digest::MD5::File\nWriting MYMETA.yml\ncp File.pm blib/lib/Digest/MD5/File.pm\nManifying blib/man3/Digest::MD5::File.3pm\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/1.t .. ok\nAll tests successful.\nFiles=1, Tests=6, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr 0.01 csys = 0.08 CPU)\nResult: PASS\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/Digest::MD5::File.3pm\nInstalling /usr/local/share/perl/5.14.2/Digest/MD5/File.pm\nInstalling /usr/local/man/man3/Digest::MD5::File.3pm\nAppending installation info to /usr/local/lib/perl/5.14.2/perllocal.pod\n DMUEY/Digest-MD5-File-0.08.tar.gz\n /usr/bin/make install -- OK\nRunning install for module \'LWP::UserAgent::Determined\'\nRunning make for A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\nFetching with LWP:\nhttp://apt-mirror.front.sepia.ceph.com/CPAN/authors/id/A/AL/ALEXMV/CHECKSUMS\nChecksum for /home/ubuntu/.cpan/sources/authors/id/A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz ok\n\n CPAN.pm: Going to build A/AL/ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n\nChecking if your kit is complete...\nLooks good\nWriting Makefile for LWP::UserAgent::Determined\nWriting MYMETA.yml\ncp lib/LWP/UserAgent/Determined.pm blib/lib/LWP/UserAgent/Determined.pm\nManifying blib/man3/LWP::UserAgent::Determined.3pm\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/01_about_verbose.t .... ok\nt/10_determined_test.t .. ok\nAll tests successful.\nFiles=2, Tests=15, 38 wallclock secs ( 0.03 usr 0.00 sys + 0.08 cusr 0.01 csys = 0.12 CPU)\nResult: PASS\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make test -- OK\nRunning make install\nManifying blib/man3/LWP::UserAgent::Determined.3pm\nInstalling /usr/local/share/perl/5.14.2/LWP/UserAgent/Determined.pm\nInstalling /usr/local/man/man3/LWP::UserAgent::Determined.3pm\nAppending installation info to /usr/local/lib/perl/5.14.2/perllocal.pod\n ALEXMV/LWP-UserAgent-Determined-1.07.tar.gz\n /usr/bin/make install -- OK\nRunning make for T/TI/TIMA/Amazon-S3-0.45.tar.gz\n Has already been unwrapped into directory /home/ubuntu/.cpan/build/Amazon-S3-0.45-k2CuVr\n\n CPAN.pm: Going to build T/TI/TIMA/Amazon-S3-0.45.tar.gz\n\nWarning: Prerequisite \'XML::Simple => 1.08\' for \'TIMA/Amazon-S3-0.45.tar.gz\' failed when processing \'GRANTM/XML-Simple-2.20.tar.gz\' with \'make_test => NO 2 dependencies missing (XML::SAX,XML::SAX::Expat)\'. Continuing, but chances to succeed are limited.\ncp lib/Amazon/S3.pm blib/lib/Amazon/S3.pm\ncp lib/Amazon/S3/Bucket.pm blib/lib/Amazon/S3/Bucket.pm\nManifying blib/man3/Amazon::S3.3pm\nManifying blib/man3/Amazon::S3::Bucket.3pm\n TIMA/Amazon-S3-0.45.tar.gz\n /usr/bin/make -- OK\nRunning make test\nPERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, \'blib/lib\', \'blib/arch\')" t/*.t\nt/01api.t ............ skipped: Testing this module for real costs money.\nt/99-pod-coverage.t .. skipped: Test::Pod::Coverage 1.00 required for testing POD coverage\nt/99-pod.t ........... skipped: Test::Pod 1.14 required for testing POD: Can\'t locate Test/Pod.pm in @INC (@INC contains: /home/ubuntu/.cpan/build/Amazon-S3-0.45-k2CuVr/blib/lib /home/ubuntu/.cpan/build/Amazon-S3-0.45-k2CuVr/blib/arch /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl) at (eval 4) line 2.\nFiles=3, Tests=0, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.09 cusr 0.01 csys = 0.13 CPU)\nResult: NOTESTS\n TIMA/Amazon-S3-0.45.tar.gz\nTests succeeded but one dependency not OK (XML::Simple)\n TIMA/Amazon-S3-0.45.tar.gz\n [dependencies] -- NA\nRunning make install\n make test had returned bad status, won\'t install without force', 'changed': True, 'rc': 1, 'start': '2015-09-29 01:17:48.616577', 'stderr': 'Warning: prerequisite Digest::HMAC_SHA1 0 not found.\nWarning: prerequisite Digest::MD5::File 0 not found.\nWarning: prerequisite LWP::UserAgent::Determined 0 not found.\nWarning: prerequisite XML::Simple 1.08 not found.\nWarning: prerequisite XML::NamespaceSupport 1.04 not found.\nWarning: prerequisite XML::SAX 0.15 not found.\nWarning: prerequisite XML::SAX::Expat 0 not found.\nWarning: prerequisite XML::NamespaceSupport 0.03 not found.\nWarning: prerequisite XML::SAX::Base 1.05 not found.\nCannot determine perl version info from lib/XML/NamespaceSupport.pm\nUnrecognized character \\x89; marked by <-- HERE after <-- HERE near column 1 at /usr/share/perl/5.14/unicore/lib/Gc/M.pl line 1.\nparsed 80085 bytes in 0 seconds\nFailed 1/14 test programs. 0/89 subtests failed.\nmake: *** [test_dynamic] Error 255\nWarning: prerequisite XML::SAX 0.03 not found.\n# \r# Package Version\n# perl 5.14.2\n# XML::Simple 2.20\n# Storable 2.27\n# XML::Parser 2.41 (default parser)\n# XML::SAX Not Installed', 'delta': '0:01:13.564302', 'invocation': {'module_name': 'command', 'module_args': 'cpan Amazon::S3'}, 'warnings': []}}